2. analog
  3. 175583-3976

Received The MC2000 Back From Expert Stylus Today

So I got the Ortofon MC2000 back from Expert today, and Mr. Hodgson did a beautiful job on this service. He fitted a new Paratrace stylus and made a minor repair to the end of the OEM cantilever. Looks as new, and there are no oddities to the stylus assembly. The Paratrace diamond is quite diminutive, barely able to be seen with my aging eyes. 

This afternoon I installed it on a very light Fidelity Research headshell, looks kind of like one of the Swiss cheese SME ones. Wired it to a T2000 transformer and then to a Graham Slee Accession. 

This is a remarkably detailed and neutral sounding cartridge. I have a few decent cartridges here and this is as good as any I have experienced. My system uses a pair of JBL 4365 speakers and a Halcro DM8 pre amp, so I have to be careful with system synergy as a too clinical component can push it over the edge. The MC2000 comes very close to doing this. I am considering a wood headshell like the Yamamoto boxwood, due to its low mass and its ability to add a touch of warmth/body to the overall sound. 

But even as it sits the transparency, the fine detail, the dynamic contrasts are all outstanding. I can tell after an evening of listening this is a keeper for me, and while its been a bit of a drawn out journey to accumulate the bits and pieces and get the cartridge serviced...well...it was worth every bit of effort. 

Yes I enjoy my Transfiguration, ZYX, and Ikeda, that is true. But I like the MC2000 every bit as much and I would get rid of a whole bunch of stuff before I ever parted with this cartridge. 

neonknight
nandric's avatar
nandric
4,086 posts
 

Hi neonknight, If you look at new (expensive) Ortofons  you will see also

pretty low output ( 0,2mV) but the lessons from MC 2000 are still in

high regards: only one layer of wire for's 's  the coils and (probably) stronger

magnets to increase the output.  BTW deed Lew try to seduce you with

''hude offer''  to sell to him  your  T2000, He is desperate to find one.

He may try to convince you that phono-pres are better solution referring

to Raul's  conviction as ''argument''. 

neonknight OP
348 posts
 

@nandric I am not a vintageophile, but I certainly have a respect for the classic components. The MC2000 is one of them. When I was in college I worked part time in an audio store and the owner was a huge MC2000 fan. I could never afford one, but did dream of it. So when I got a chance to get one, it allowed me to revisit my past in a meaningful way. I will not be parting with this cartridge/step up.

I know very well how hard it is to obtain a T2000. I will not be letting mine go. What is amazing is I got the entire MC2000 box, packaging, screw driver, graphs, weight scale, stylus brush, and even lapel pin. with the T2000 i got the box, packing, paperwork, with the only thing missing was the included RCA cables. I don’t think I ever saw a more complete MC2000/T2000 package up for sale. I feel quite fortunate to have lucked into this.

lewm
12,631 posts
 

Nandric, I don't know what you are talking about.  I am not searching for a T2000, and I would not buy one if offered to me for a "bargain" price.  I am very happy using a step-up device custom made for me by Dave Slagle (Intact Audio), who is a friend.

nandric's avatar
nandric
4,086 posts
 

neonknight, you forget to mention in the context of ''the entire MC box''

that the material of which the body as well the HEADSHELL are made

is aluminium oxide which is heated to become ceramics; second only

to diamond qua hardness, And I forget that not Lew but nandric is longing

for the T2000 (grin).

neonknight OP
348 posts
 

@nandric 

By box I mean the entire OEM packaging for the cartridge. The outer box, the inner hinged and velvet lined box....basically everything you would get with the new purchase of the cartridge that owners seem to lose over the years. 

I also have the factory Ortofon headshell for it, but it makes no sense to use it as it weighs 10.5 grams, the cartridge weighs 11 grams, and has a compliance of 30 dyne or so. But I do have it! 

More to discover