Turntable - The Next Step


Hi All. I currently have a Rega P3 turntable with an Elys 2 MM cartridge and my phono amp is a Musical Surroundings Phonomena II. I am looking to upgrade in the near future. What would be the logical next step up to significantly improve my experience?  In an effort to limit expense, will replacing one part of my set up (i.e. cartridge, amp, turntable) do the trick with this kind of budget - phono amp < $800, cartridge < $400, complete turntable , < $2000?  Thanks in advance for your thoughts!

gnoworyta

I think you’ll have a hard time bettering the Musical Surroundings Phonomena II at $800. I've heard that phono pre in a few different systems with very good cartridges, and it's quite good compared to anything near it's price point.

If it were me, I’d add that $800 mostly to the turntable and some to the cartridge. If you do around $2600 on the turntable and around $600 on the cartridge (or however you want to split it), it would open up many more possibilities to improve your system.

Lots of options and I agree with vinylzone.  I think you may get better bang for the buck by allocating more to the table and catridge.  

Your cartrigde is a good one - I'd even consider putting it all into the table versus peanut butter spreading it.  I think a Rega P8 using your  the Elys cart and phone stage would be a huge upgrade sonically

@gnoworyta - having gone through a complete rebuild of my 1981 Rega Planar II Turntable - total cost over $2000 - I would recommend switching to a Music Hall MMF 7.3

It has the following great features

  • music hall’s unique dual-plinth construction
  • one-piece full carbon fiber tonearm
  • fully adjustable VTA, azimuth, and dampened arm lift mechanism
  • counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper
  • completely isolated/decoupled DC motor with 33 and 45 rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge
  • motor sits on its own resonance-damping puck
  • optional Ortofon 2M Bronze cartridge with a nude fine line stylus ($440 value)
  • the supplied cartridge is properly aligned and mounted
  • precision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operation
  • non-resonant acrylic platter with metal screw-on record clamp and soft felt mat
  • high-quality gold RCA connectors and detachable phono cable
  • adjustable tip-toe feet with anti scratch cups
  • low-noise, fully-manual belt drive design
  • built-in round spirit level for proper leveling
  • dust cover and 45rpm adaptor included
  • excellent instruction manual and easy assembly

If oyu find the Ortofon is lacking - you can then sell off the Rega and get a really good cartridge - like one of the Soundsmith cartridges

For a Phono Stage - take a look at the Simaudio range

  • even the entry level 110LP V2 phono stage is excellent value and performance
  • they are very quiet and can handle MM and MC

I had the Elys 2 and changed to a Denon DL103 MC cartridge, which i found to be superior

  • but have since changed to a Soundsmith modified Denon 103 - and never looked back.

 

Hope that helps - Steve