2. speakers
  3. 175664-41

Magnepan and Bob Carver Raven amps

I know the Magnepans are not very efficient and most of the amps that are usually paired with these speakers are not to my licking.

I own the Bob Carver Raven mono block amps; Will these amps provide sufficient power for the Magnepans? They are rated at 350 RMS at 8 ohms and 400 at 4 ohms, but they are tubed so that may matter.

I was considering either the 3.7i or the 20.7.

ozzy

128x128ozzy
secretguy
1,703 posts
 

I ran Maggies VERY well with 100 tube watts.

ozzy's avatar
ozzy OP
7,466 posts
 

m-db,

I'm not sure if the 2,4,8, ohm tap is real. To me they look like they are all connected together. I'll check again.

ozzy

ozzy's avatar
ozzy OP
7,466 posts
 

secretguy,

That's why I'm thinking that the Carvers should be ok. But there is no way to try them together.

ozzy

rickdoesaudio's avatar
rickdoesaudio
56 posts
 

I run VTL 300s with my 3.7s. More than enough power and sound is wonderful

ozzy62's avatar
ozzy62
3,131 posts
 

I ran 1.6s with 100 tube watts years ago. That same amp would NOT power the  3.5r. But with 400 watts on tap you should have no problem with the 3.7s.

More to discover