2. amps-preamps
  3. 175678-150662

ATMA-SPHERE MA-1 MK11.3 with magnepans, am I completely mad?!

I have a pair of magnepan 20.1, which I run active. I user a pair of 600w amps on the bass panels and then I use 80w KT88 monos on the mid-bass + tweeters.

I am considering buying a pair ATMA-SPHERE MA-1 MK11.3 silver edition in lieu of the KT88 monos.

The maggies are a 4 ohm load and I believe that they are a pretty "flat" 4 ohm and don't dip below that.

The ATMA-SPHERE MA-1 MK11.3 are 140w so I think they could be a winning match, but what do you think?

psilonaught
gita
37 posts
 

I thought the issue was impedance. 

The Maggies dip pretty low and the Atma amps like to see higher. I did hear a rig that used Z Transformers (the anti-cables guy) between Atma-Sphere and Maggies and it sounded great.

Best talk to Ralph.

atmasphere's avatar
atmasphere
11,784 posts
 

If you have a woofer amp, and the mids and highs are handled by the MA-1 I think you have a shot at it. You might want to also try the ZEROs with the amps (www.zeroimpedance.com); do both ways and see what you prefer.

tweak1
3,655 posts
 

WOW, if that works out, I'll bet you'll have a killer system. Would love to hear it

psilonaught OP
4 posts
 

Ok thanks for the vote of confidence, I'm going to message the dealer and pull the trigger on them !

I would be using the ma-1s with a KR Audio type 45 DHT preamp, with Emission Labs 45 mesh globes and an Abbas Audio 4.1 SE pcm, nos tube dac.

My crossover is a sublime audio k231.

This setup should give me an extremely organic digital system. 

More to discover