Why do I need power management if I have a great power cord?

A Class A PASS XS300 monoblock will dump 48A on demand.  You need two of these.  See where this is going?  

@piaudiol 

This seems really unlikely!! Giving the amp the benefit of the doubt, and assuming it can double power into 2 Ohms, it would be making 1200 watts. If it can do that the current would be about 24 Amps. To do 48 Amps, the amp can would drive 1 Ohm with 2400 Watts (that would be 48 Amps of current) and I just don't think so. The math is against it.

You might want to read this:

http://www.atma-sphere.com/en/resources-common-power-amplifier-myths.html

Whomever you got your information from was misinformed, IMO.

Abruce19

You missed my point. I am a proponent of large gauge dedicated wiring runs from ythe service entrance to the system... NOT thin gauge romex.

Power cables do not store energy, at least the good ones don’t.

I built my first amp when I was 13 - 61 years ago. I have built over 30 amplifiers in my lifetime including an F6 for a friend of mine. I grok amplifiers.

atmashere

I've read that link several times in the past.  BTW, I like your amps!

The quote came from Nelson Pass.

@piaudiol  So we would agree there is no point to have a heavier cable between the wall plug and the amp than what is behind the wall plug running to the circuit breaker?

So we would agree there is no point to have a heavier cable between the wall plug and the amp than what is behind the wall plug running to the circuit breaker?

I concur!