Audio Aero Capitole - 6021W subminiature tube ??


I would appreciate hearing from someone who can explain the performance of these tubes in the Capitole, including the typical life of the tubes, whether they are susceptible to becomming microphonic or noisy, and how to purchase or change them if necessary. I believe I read these are really small (like the diameter of a pencil) and that they are soldered onto the board. If that is true, is it then necessary to send the player back to the distributor or manufacturer if they need replaced, or are these readily available and set up for user installation? How many years is typical for the tubes to perform in the Capitole before replacement is necessary? Thanks.
mitch2
Hi masilu
Are you happy with your upgrade. What sort of difference did it make to the sound? Thanks
Hello everybody,
Since it is capitole thread maybe somebody had similar problem.
When my monoblocks (Clayton M100) are connected to my CDP Audio Aero Capitole mkII with XLR interconnect, there is pretty audible white noise. When I disconnect XLR connection noise disappears. Noise have constant level in both channels. When Claytons are connected to CDP with RCA interconnect there is no noise, dead quiet.
Any idea why ? Any suggestion. Is not supposed XLR to be quieter connection ? I have tried many different RCA, XLR cables, always the some, so problem is not in a particular cables make, but in the connection itself. problem must be either with AA Cap or with Clayton.
Sorlowski- Have you checked to see that the pin-out on the balanced output on the AA is the same as the pin-in on the Claytons? There are some products out there with a non-standard configuration for the XLR connectors.
That is an interesting thought. Is it not normalized, especially that both Clayton and AA cap are products designed for US market. US How do I check that ?