I guess I was lucky in that my whole house was wired with 20 amp circuits. We bought the house in 2016 and it had ben built in 2008. The original owner was a computer guru and had the circuits all 20 amp.
Power Cables and Wall Sockets
Without knowing for certain, it seems to me that power cables can only be as good as the in-home wiring coming to the wall socket. Is it possible that those who use expensive cables have improved the wiring to the socket? Or is the power from most wall sockets normally excellent, but is limited by conventional power cables?
- ...
- 97 posts total
The later is provable with a light meter, or other methods to show the lightning flickering. A lighting company could produce a graph of lumins versus time and produce a “strobe metric”.
So it is not exemplified perfectly.
|
That is highly unlikely. That’s because determining the proper wire gauge for a circuit includes considering more than just the amperage. Under the NEC, which sets the minimum requirements for electrical installs, you also have to calculate the length of the run and whether the cable is enclosed in conduit. I’m not calling you a liar, @retiredfarmer - you probably were just given bad info. It's just a simple fact that using a 14 ga. wire on a 15A line is not by itself a guarantee of safety. Consider that the purpose of the breaker is to protect the wire in the wall. |
@yoyoyaya @rbertalotto I can understand that the effect of upgrading power to improve sound has been a point of debate; however, there are some good recommended changes that I can make without spending a bundle (like better outlets). If I have the experience of believing that it improves the sound, then I'll consider further upgrades. I'm not really skeptical about the improvements that good power can make empirically, but I also know that I hear with more than my ears. The visual landscape makes a big difference in my enjoyment of the sound and my satisfaction of solid power could add another facet to my enjoyment. I don't have super high expectations, but would be delighted to be able to hear an improvement in soundstage, clarity and instrument separation. And that would actually be awesome! First I'll upgrade my 40 year old electrical outlets, then go from there. |
I had that happen to me in an older home. Over the years the connections at the wall outlet can become loose. The simple fix was to shut off the circuit at the panel. After verifying the circuit was cold, I removed the plate and pulled the outlet out from the wall just far enough I could get a screwdriver on the screws and tightened them up again. A couple were barely finger tight! Once retightened, problem solved! You might try this simple and free fix.
Happy listening. |
- 97 posts total