2. speakers
  3. 1349592184

How long untill I can really Flog them Hard

I know it sounds brutish but that how i like it, nice n LOUD. I am replacing all of the drivers in one 802D as they are damaged and i am wondering how long do i treat them niceley on love volume before a can light them up. The speakers dont show their true colors until they have a few horsepower behind them so naturally i need to run them at that level.

by all means tell me im a savage if you feel the need.
ellrotts
manitunc
795 posts
 
More speakers are "blown" from too little power than too much. If your amp is clipping, it sends off all kinds of nasties to the speaker, especially the tweeter, which cant take much to start with. What amp are you using? The 802 should take plenty of power.
onhwy61's avatar
onhwy61
5,261 posts
 
He damaged the speakers by plugging/unplugging an RCA input with the volume up.
donjr
1,335 posts
 
Lets cut the guy a break (although he blamed his wife for the incident). Flog away.
b_limo's avatar
b_limo
2,288 posts
 
I have the same question because I've got a new pair of paradigm studio 20's. I'm taking it kind of easy for 100 hours or so since I cranked my then new studio 10's on day 1 or 2, heard a pop then backed off immediately. After that, the speaker that popped would make that same popping / distorting sound that I initially heard, from both the midbass and tweeter, when turned up loud. By comparison, the speaker that didn't pop could be turned up 4 or 5 d.b.'s louder (according to the volume indicator on my pre-amp) and that extra 4 or 5 d.b.'s would have made a world of difference to me.
french_fries
815 posts
 
I heard a pair of 802 MATRIX speakers years ago playing Bruckner #9 (at an audio store), and the guy had them CRANKED!! to where the background noise (it was a remastered analog recording) was VERY noticeable. anyway, he stated to my worried face that you "couldn't blow these speakers". the Mark-2 version of these speakers had a protection circuit built in as well which was later eliminated to improve the transparency of the speaker. now, of course you "can" (blow the speakers) but as long as you have a good front end and you have some point of reference as to what the entire system is capable of doing, there is little cause for concern.
B&W speakers started out as studio monitors and had to duplicate the same SPL's as the source material. they had a reputation for being brutally honest, but not "delicate". BUT some people seem to be able to do things during a party that can be heard and felt a half a mile away. If you're one of those maniacs (We Salute You!) then get a no-fault warranty.
More to discover