How Do I Connect A passive PA System's Amplifier To A Mixer

Hi, hoping someone can help me here.

I have a pa system with passive speakers and a 800W amplifier.

I want to hook it up to my mixer for live gigs (three piece band).

This is the pa system:

My mixer is a Behringer X2222USB:

Hope this is posted in the right section - if not please advise.

Thanks!

coolrekz04-19-2022 6:00pm

erik_squires Details Discussions Posts This discussion Message User 16,069 posts 04-19-2022 at 07:17pm Copy Comment URL Report Comment Edit Delete Well, we don't get a lot of pro gear questions here, but it seems very simple. Use 1/4" TRS connectors from the Main OUT on the Behringer to your PD amp/mixer using the Lin IN connectors. The real problem is you have 2 mixers. The Behringer and the PD amp both have mixers built in, so you have a lot of extra controls, but this should work.
coolrekz OP Details Discussions Posts This discussion Message User 14 posts 04-20-2022 at 02:07am Copy Comment URL Report Comment Edit Delete Hi thanks for the answer - when you say the "line in" on the pd amp mixer do you mean two of the inputs on the front that i would normally plug an instrument/mic into? If so then id lose two of the inputs for instruments on the mixer? If so would these two inputs on the pa amp/mixer become the main out control?
coolrekz OP Details Discussions Posts This discussion Message User 14 posts 04-20-2022 at 02:14am Copy Comment URL Report Comment Edit Delete Not that the loss of two inputs on the pa/amp mixer would matter as i would basically be using the pa/amp mixer to power the speakers and the separate Behringer mixer for all the inputs.