@dhcod : Why do you need an external SUT with your Lamm PS De Luxe? 58db plus the line preamplifier gain is enough for your 103R.
Now, in the other side : Have you in the past that kind of hum problem using your Lamm with out external SUT or made any analog rig change when you got the external SUT?
If you made any analog rig change the 103 is an easy to be contaminated and develops some kind of noise as " hum " if those cartridge/tonearm connectors are not tigth secured.
R. |
Interestingly the SUT in the Lamm is a real weak point. The external, even a relatively inexpensive one like the AnaMighty one I have, is a huge improvement over the Jensen’s inside. I just A-B’d it again this morning and it sound great with the internal but the external is sublime. The system change that has caused this problem to become noticeable is a switch to SET and higher sensitivity speakers. The amp change came after I first noticed the hum so it’s not a source of the problem. |
@dhcod the good news is that if the Jensen's inside the box can be quiet there is no reason an external sut cannot be too. Between grounding, and in a worst case scenario additional shielding, you should be able to get the noise down...
|
I use a .5 meter Atlas Elements Integra phono specific cable that has very low capacitance between the SUT and the phono preamp. Also, I do Not ground my SUT, as the turntable is already grounded to the phono preamp. Adding too many grounds will add noise. That is what I have found in my experimentation. Of course, all systems are different and I'd advise to do what works. |
Up above in this thread, someone suggested experimenting with the physical orientation of your external SUT in relation to the power transformer of your Lamm phono stage. In addition to playing with grounding, have you tried that yet? There is a possibility that will make a difference. Also Jensen Transformers are very very good. I am surprised you find them to be inferior to even a low priced external SUT. Perhaps Lamm does not use the top of the line transformers available from Jensen. You might consider replacing the Jensens in your unit with the best current Jensen SUT. |
