Can moving wire location at circuit breaker reduce hum?
The power line going into my music room will oftentimes make the amps’ transformers hum. I’ve tried many things but have had no luck. If I take any component that’s humming into a different room run on a different circuit breaker, the hum disappears.
Would swapping out the wires that go into the two separate rooms at the breaker make any difference? Or is it more likely that one of the outlets on the circuit that goes into my music room is somehow miswired and is causing the hum? I can unplug everything from the circuit except for my amp and it still hums.
Any suggestions on what I might be able to do short of hiring someone to run a dedicated line?
Thanks,
Mamoru
@milpai That's correct but I think you missed that this is mechanical, not electrical hum. Mechanical hum comes from DC on the line, not from ground loops. DC is when the AC voltage is shifted up or down by a DC voltage. So the AC may be 120V, but it's shifted so it's 0 crossing is no longer 0. |
Fortunately, the first test, to identify if this is caused by another electrical component is fairly simple. Turn everything else off in the house. 😀 Flip off every breaker and make sure nothing is left on your circuit but your amps. If the problem is gone, you know it's something else, and that's my bet, but yeah, it could be a bad neutral. |
| Post removed |
