What type of wire for dedicated 20A AC lines?

I recently installed a dedicated 20 amp, 8 gauge multi-strand run.  The run is 123 feet in length first going to a 30 amp locking plug (that goes to my surge protector) within the entertainment console then an additional 2 feet to a pair of 20-amp, hospital-grade plugs at the termination outside of the console.

The 8-gauge wire is maintained all the way from the panel to the three outlets (including the hospital-grade recepticles) and there are no junction boxes along the way.

And just because I had it, I put a big ferrite bead over the wire where it comes out of the panel.

This cleaned up a bunch of "hash" on my Yamaha SACD, but less so on my Oppo95, which has a better power supply.

@jea48   You are right - there will be no current thru rectifiers until capacitor voltage will drop below rectifier supplied peak voltage.  Theoretically it is possible to build LPS where capacitors keep average instead of peak voltage, but it requires huge inductor in series (in order of Henries) made with thick wire and AFAIK nobody is doing it.  One problem is lower rail voltage (average instead of peak) while the other is dependency on the load current.

http://www.r-type.org/articles/art-144.htm

This stuff is awesome and I barely comprehend the explanations, but it sounds like there are strong arguments that I’m going to really going to enjoy my big fat 10AWG wires with lower resistance, enabling more rapid access to glorious peak current, all for like two hundred bucks extra, give or take. And if the anti 10-gauge crew end up being right and it does nothing, the extra bucks will totally still be worth it knowing those big fat wires are providing the juice!  Can’t go wrong.

There is more to it than just adding a 10 awg wire.  I design electrical infrastructure to support audiophiles homes as well as manufacture premium panelboards.  I have a pretty dense 6 page specification on how to assemble it all.

FWIW, if your going through the trouble of adding a line, add 2 to 4.  Its not much more money and you will hear the difference. 

@kingrex

I’ve read different opinions on running all gear in system through single 20A line versus multiple. I don’t know enough to have an opinion myself yet on this.

If someone were to install three 20A lines for a single 2ch system, let’s say, how should they determine the components to be driven by each line? Let’s say system has 2 monoblock amps, a preamp, a digital system (e.g., dac, streamer/server, sacd player, maybe external clock), an analog system (TT, phono pre). What goes to each of the three lines? or two lines?