Amp Internal Wire
Hi Gents, has anyone have any experience with upgrading amp or preamp internal signal wire? Most older equipment seems to have thin maybe sometimes poor internal wiring. In the world of OFC/OCC/Sterling and even more exotic wire available these days, any experiments done using this internally on components swapping out the cheap?
Lots of discussion about doing this with speakers, but never with components I've seen. For instance, I am thinking about replacing copper 'appliance' wire in an old Bryston with 14awg sterling from the board to the speaker binding post board.
Any thoughts?
rickysnit I used Cardas chassis wire and their solder , also their speaker binding post and RCA connectors . 9.5 awg from board to speaker posts ! and 20 awg from rca connectors to board . Cardas is harder to work with than most because you have to use a solder pot . Neotech stranded wire would be a great upgrade . |
Oh boy.... it did not take you long to resurface here yet another time. I sounds like I now have to another name in my long list:
theaudioamp deludedaudiophile
thynamesinnervoice
cindyment
snratio
yesiamjohn
sugabooger
dletch2
audio2design
dannad
roberttdid
roberttcan
heaudio123
audiozenology
atdavid |
Like I said, @holmz , all yours. Crazy posts draw out crazy people. |
What is crazy, and crazy as in borderline of insanity, is you coming back here so many times. It does not matter how many times they kick you out, you are back pronto. This time it only took you 9 days since your last username was banned. And to think you have to create (yet) another Gmail address to be able to create a new username here, is ... well.... |
| Post removed |
