Original Sonus faber cremona auditor again?

Your going to think I'm a "hammer head" but ll tell you.

I have a Mcintosh C50 pre,MCD600 cd player..MC1.25KW amps,Blusound vault,...l use 2 electronic crossovers...l play all my monitors rolled off between 120-180 hz...l play them loud and l don't want to hurt them..under 120hz l use 2 subwoofer towers (12) 1000 watt class D 8" sealed,6 per side..under 50 hz there is 4-12" custom sealed subs with radiators tuned to 25hz.powerd by 2 CrownK2's..everything is in phase and level matched...l can switch between all my monitors depending on what l want to hear...only the Accordos are in the sweet spot...l have many other amps l also use...all solid state..l The owner of Quintessence Audio was over listening and he was intrigued enough to stay for a while...its a big room...l like it..lm sorry to say l don't like tubes or vinyl...l like gobs of headroom...

@vinnydabully This is what Franco Serblin has wrote about the amplification for Acccordo's (in case you have not read it somewhere already)

"Let me clarify some issues related to amplification for the Accordo. These speakers have been designed to be as transparent and dynamic as possible. In order to successfully achieve this objective I have used a unique woofer with a long-stroke diaphragm and low resistance bass-reflex loading designed to offer the best impulse response. Although the Accordo can be driven by any amplifier, we recommend amplifiers with low output impedance and medium output power (40-70wpc into 8Ω and 80-150wpc into 4Ω). Too much power may result in excessive cone excursion and deterioration of signal quality. If we use the Accordo with a tube or Mosfet amplifier with high output impedance we may end up with not fully optimal bass control and again encounter uncontrolled cone travel. Needless to say that tube amps are generally not too good in this regard. I personally use the Einstein integrated amplifier which is nice sounding but without bass as good as transistor amps." - Sincerely, Franco Serblin

I can only add that I have heard Accordo's sounding great with 80w tube amp as well and obviously you know what you are doing when using your 'artillery'...

I told you l was a hammerhead....l may tone it down a bit with these Accordos....lm contemplating moving them into a smaller room with some dedicated front end equipment....l seriously try to never play any of my gear close to distortion....l have a garage with Multiple sets of JBL'S for that.

Richard Vandersteen is another Arnie Nudell

I've tried using a vintage Hafler XL600...that is 450x2 into 4 ohms mosfet output. Stereophile called it a solid state that has a unique "tube like" sound. Seems to work very well....lm very careful not to push these...l absolutely don't want to hurt a driver....lm reserving the Mcintosh monoblocks for the Kappas.....l listen in the 80-90 db range is plenty for me...