Aurender N200

@oddiofyl What coax cable are you using?

Also, are you switching sample formats often? If so there is a setting to allow to adjust for that and put a few second delay. Doing that sometimes helps to adjust for the switching. 

Hi Juan

I tried setting the delay and no change.   There is digital noise and the unlock light glows dim and the sample freq lights flicker.   Only works via lower sample rates.   Three known good coax , including new d-750.  

Tried the Vault in both coax inputs of DAC works flawlessly 

Works fine via RME coax input.   

Problem only exists with N200 via coax to the Lab 12 DAC

Have you tried contacting their tech support? They are pretty good and responsive.

Glad to see you got the D-750 already, and I’m sorry to hear the N200 and your DAC are not playing together nicely. Do you happen to have a toslink cable? I think maybe one was included with the N200. If you try that and it works, then the SPDIF interfaces “should” be fine and it localized it to the coax connection. If Toslink also drops out, then it is a signal that one of the units’ SPDIF interfaces is problematic as a whole.

If you haven’t already, check it there are firmware upgrades for both units and also try a hard power down on both for a few minutes. 

Very odd that the N200 works flawlessly with the RME but not your Lab 12. 

I believe it’s the DAC and not the Aurender.  
 

I reached out to my dealer and they believe there is an update that needs to be done on my DAC    He is going to investigate and get back to me.  It sounds great through either DAC  

It was nice being able to play content on the Vault through the Aurender.  Pretty cool