Chord M-Scaler and Should I Want One?

Have you looked at the HoloAudio May DAC KTE?

It is established as the current competitor for Hugo + M Scaler but will cost you quite a lot less.  

@nyev, I use an AudioQuest Diamond USB cable going from my music server to an Audiowise SRC.DX USB to DX converter so that I can bypass the Amanero USB input in my Chord Hugo M Scaler because I get a better signal with a BNC cable. Some folks say that good cables don’t matter. But my experience has shown me this not to be true. 

I would try another dac. Either of the top 2 Denafrips dacs, the Holo May, either of the top 2 Audio Mirror Dacs would probably sound much nicer than the Diablo 300 Dac. I used to have the Diablo300 with the built in dac, and all of the above mentioned dacs were much better sounding than the Diablo dac in my room

@phastm3 and @soma70 , yes, I know what you are saying is true about those DACs. But for me, I’m a cable guy, and tend to go top of the line. And that would mean adding a very expensive power cord, AND interconnect into the equation. I know I could improve things by just getting one of those DACs you mentioned and compromising on the cabling, but I would just end up getting the pricey cables. I’m not prepared to go that far now. This is why I’m opportunistically considering adding the M scaler, likely used. It would be a mere fraction of the cost of the separate DAC cables alone.  I think it’s a psychological thing, I need my gear to be performing at their best, completely unrestrained, regardless of whether it’s lower or higher end gear.

Also @phastm3 not sure if you are still using your Zenith MKIII, but if so have you tried the Innuos PhoenixUSB? You may not be the “extra box” type, but there is no denying it frees up the sound and for me dramatically improves the sound coming from the Gryphon DAC module. Some say it brings the Zenith MK3 90% of the way to the very expensive Statement, but I just read another reviewer that said he was hard pressed to hear the difference between Zenith plus Phoenix and the Statement.

I had the zenith mk3 with the Phoenix usb. I didn’t think the Phoenix did much in my system. I never tried the Phoenix with the gryphon dac. I sold both and bought  an Auralic Aries G2.1. I thought the Auralic sounded much better than the Zenith…this was with the Holo May as a dac. I have a Lumin streamer now….it will upsample to dsd256 and my T+A Dac200 sees native dsd256. My terminology may be a little off, but it sounds great and runs smooth with no glitches.