Thank you @russ69, but how as they are coax? I don’t have a way to connect it between amp and preamp?
Low buzzing through speaks
Hello All,
Need some serious help here. So I just (upgraded?) from a Marantz AV8802A to a McIntosh MX122 preamp. I also just got brand new Revel Performa3 speaks all around (5 channel setup). I disconnect everything from the Marantz and then into the McIntosh, connect the speaks and I have a faint buzzing through all 5 speakers (that was not there previously). I have everything plugged into a Furman Elite 20pfi power conditioner which is plugged into a dedicated 20 amp circuit. My power amp is a Simaudio Titan HT200 5 channel. This is not going through the Furman but directly into the other outlet on the same 20 amp line. I even tried plugging the Sim amp into the Furman to see if that helped-no change faint buzz is still there. I have unplugged just about everything, and the buzz is still there. It is very faint and does not get louder when I turn up the volume. Again it is faint and you have to put your ear up to the speaks to hear but it is definitely there. I have tried so many things and nothing gets rid of it. It is not my cable box (I did have that issue previously with the Marantz but as soon as I unplugged the coax from the box it went away so I just bought a coax loop eliminator connected the cable to that and noise was all gone) as I unplugged that and started there.
Any help would be so sincerely appreciated????
- ...
- 127 posts total
If the Titan is more than 15 years old, there could be a possibility the power supply filtering capacitors causing the noise. You can disconnect all the input cables from the Titan, power it up and see if you can still hear the buzzing noise. |
Thanks @imhififan It is more than 15 years old but I sent it to Simaudio for “calibration and cleanup” last year and she came back squeaky clean. They actually said she was in better shape than most-though they said they don’t see many of them because they “overbuild their amps”. I’ll give that a shot. Like I’ve been told it’s a minimal buzz that you really have to get your ear up to within a few inches of the tweeter to hear, but it wasn’t there before so that’s why I’m totally perplexed. I should also mention that when I switched out the Marantz for the McIntosh I totally switched up my setup which means cables and power cords are all intertwined. This also might be causing it im told? It’s always been spaghetti ills but now IC cables and power cords have changed logistics… |
Thank you @jackd! I’m going to try that tomorrow AM, and also try unplugging the IC’s from the Titan as @imhififan suggested. I’m really hoping it’s “the nest”😂 which it truly is great call on that one😂!
I have a Shunyata Alpha 20 amp power cable on the Titan and all Transparent Plus XLR IC’s from the Titan to the McIntosh so it’s not like I’ve skimped there…That’s actually the reason I wanted to move the location of the preamp because I could not get at the back where it was before so I moved it to the top of my Entertainment center. But that obviously changed the cabling around. So maybe that is the ticket🤞🏻!
just want to take a minute and really thank all of you who have taken the time to reply👍🏻! You guys are awesome! |
- 127 posts total