2. amps-preamps
  3. 180029-149900

Low buzzing through speaks

Hello All,

 

Need some serious help here. So I just (upgraded?) from a Marantz AV8802A to a McIntosh MX122 preamp. I also just got brand new Revel Performa3 speaks all around (5 channel setup). I disconnect everything from the Marantz and then into the McIntosh, connect the speaks and I have a faint buzzing through all 5 speakers (that was not there previously). I have everything plugged into a Furman Elite 20pfi power conditioner which is plugged into a dedicated 20 amp circuit. My power amp is a Simaudio Titan HT200 5 channel. This is not going through the Furman but directly into the other outlet on the same 20 amp line. I even tried plugging the Sim amp into the Furman to see if that helped-no change faint buzz is still there. I have unplugged just about everything, and the buzz is still there. It is very faint and does not get louder when I turn up the volume. Again it is faint and you have to put your ear up to the speaks to hear but it is definitely there. I have tried so many things and nothing gets rid of it. It is not my cable box (I did have that issue previously with the Marantz but as soon as I unplugged the coax from the box it went away so I just bought a coax loop eliminator connected the cable to that and noise was all gone) as I unplugged that and started there.

 

Any help would be so sincerely appreciated????

kingbr
kingbr OP
346 posts
 

Welcome @illaheman ! @dpop you're developing a following😂! But it’s a true reflection on your character that you have taken all of your valuable time to help. Cannot convey enough how much it is truly appreciated (though I’ll keep trying to convey😌).

Love what you said and that’s my thought and why I’m struggling to just accept because I have spent so much and dammit I think I (we all) deserve crisp clean sound!

As the great Jimmy V used to say “Don’t ever give up”! And like I mentioned earlier in this thread, the last resort is to call the church and have them send in a priest to get rid of this evil presence😂! 

I’m still in the fight man-thanks to you @dpop 👍🏻👊🏻

kingbr OP
346 posts
 

Yes very interesting (or ironic/coincidental) about the Revel’s. I connected the Mac and the brand new Revel’s at the exact same time. Fwiw I have Performa3 208’s, 208C, and M105’s. Yes had to jump on that 30% off sale, couldn’t resist!

 

kingbr OP
346 posts
 

Yeah definitely not the Revel’s, mere coincidence…

kingbr OP
346 posts
 

I am going to disconnect XLR’s and try the RCA’s first thing in the AM. Then I’ll try connecting the wire for the ground between the Mac and Sim…

dpop
293 posts
 

I’ll try connecting the wire for the ground between the Mac and Sim…

I’m not expecting this to change anything, as there should be no difference in ground planes between the two pieces of equipment, since they’re plugged into the same outlet, but you never know, and it’s still worth a try.

If we’re actually able to eliminate the buzz between the Sim and the Mac, it’ll be interesting to see what buzzes or hums pop up when reconnecting your pieces of equipment to the Mac, but let’s cross that bridge...

More to discover