A question about headphones


I've decided I would like to give the headphone experience a try because I am an early morning person and I would like my wife to enjoy her sleep.  She is definitely not an early bird.

I have a McIntosh C48 preamp and it has a headphone jack on front.  I have plugged my BT transmitter into this and paired with my Bose noise -cancelling headphones but can't say its anything to write home about.  Do I need a headphone amplifier and where do I connect the amplifier to my rig?

I like headphones that fully encapsulate my ear.  I can't see that open-back headphones appeal to me.  I am about 20' away from my rig and although I would consider a cable, what's the consensus on BT headphones or a combo BT / cabled?

I live in Canada and I was thinking to make a start, I would not want to sink more that $500 into headphones until I am convinced this is the route to go.  I still don't know about the headphone amp and its cost - if I need it.

I don't post much here but I follow this forum daily ad appreciate all opinions and feedback.  Thanks in advance everyone.

128x128r042wal

If you want something that is almost portable and decent sound check out the following DAC with headphone amp. (limited to digital only)

Matrix Mini-i Pro 3 Wireless Bluetooth DAC/Amp – Apos Audio

You can keep this next to your seating position and use the WiFI for streaming (it has BT, Ethernet, etc,,). WiFi is not the most reliable streaming option but when it works it is good. I had this unit and gave it to my friend since it was so easy to use, and my friend does not need the hassle of complicated setups.

Now if you want to step up to the very best quality sound you should explore RAAL-Requisite’s headphones. You can even use your 2-channel amp to drive them (not your preamp).

 

My BT transmitter is something cheap off of Amazon.  It fits the 1/4" plug on my preamp through an adaptor.  There must be something better out there?

I have a DAC and a Matrix DCC.  Thanks .

 

The B&W lineup looks nice but it seems BT only, no combo.  Is this correct?

I can’t see that open-back headphones appeal to me. I am about 20’ away from my rig and although I would consider a cable, what’s the consensus on BT headphones or a combo BT / cabled?

If you can’t have any sound leaking out of the headphones and want a more closed-in and intimate soundstage then closed-back headphones can be fine, but if you prefer a more expansive soundstage and a more “out of the head” imaging/soundstage experience then open-back is the way to go. I’ll also add that most of the best headphones extant are open backed. Also, if you at all care about sound quality ditch the Bluetooth and spring for a cable. End of story. While I almost always recommend a headphone amp with any decent headphones, I’ve read McIntosh may design their headphone section differently and may be perfectly fine, especially just to get started. I’d check with Mac to see how your pre’s headphone section is configured, but eventually a $500+ headphone amp will likely provide meaningful improvements.

All that said, if I’m recommending headphones in the $500 range it’s the Hifiman Ananda with their newer Stealth magnets that’s being offered at a substantial discount right now — $599 down from $999. They’re also relatively easy to drive so your Mac shouldn’t have too hard a time with them, at least to get started. I own their $1600 Arya Stealths that are stellar and I’m gonna have to spend almost double to get a meaningful upgrade, and these Anandas incorporate much of the Arya’s technology. I can also help with a headphone cable if you decide to go this route. Anyway, that’d be my recommendation FWIW, and welcome to the wonderful world of headphones. Hope this helps, and best of luck.

https://store.hifiman.com/index.php/ananda-stealth-magnet-version-open-box.html?utm_source=storewebsite&utm_medium=landingpage&utm_campaign=FallSale20221014

A couple of things come to mind.  First, I only plan to use these in my music room so why would I want noise-cancelling?  It seems the money spent on that feature could be better served elsewhere.

My preamp has two sets of outputs, RCA 1 / XLR and RCA 2 / XLR.  I have it configured so output 1 is XLR and not RCA so it feeds my power amp.

Output 2 is RCA and I have a 20' dual-RCA cable off of this going to my SVC-2000 Pro sub.  The sub is closer to my listening position.

Could I put some RCA Y-splitters on this cable before it goes to the sub and then add a headphone amplifier?  The amp would be close to where I would listen with headphones.  Thanks.

 

I like rich base.  Do open-back designs lack this?  I have heard 'bright' and a lack of base.  Thanks.