Thiel Owners

tomthiel

Excellent! Good to read that you have a contact at Sony. Perhaps your contact has a RM -  Remote Control for S9000es.

please ask about RM - Remote Control SX700.

This matches SCD 9000es Player.

Ultimately, you ears will find favor among those Filters. The Stereophile article even mentions 1 filter specifically for Classical Music. Very impressive.

Happy Listening!

The control match is confusing. The match for the S9000ES is a RMT-D122. Ebay, etc. says the D111 will work, but it doesn't work with an SACD player. Bill Thalmann is sending me his spare. Now, to find the remote for the SCD-1. Always something.

tomthiel

Right On! I am not a fan of aftermarket Remote Control. Give me OEM.

Please ask Bill if he has an extra RM SX700 (remote control). I will be more than happy to pay for it.

Happy Listening!

Happy Standard Time All

tom 

When I started upgrading the speakers I ran single wires from the 3 speakers , with the coaxial mid/tweeter wires + running together and the - running together separated thru the original holes in the coaxial chamber down the width of the back of the speaker behind the woofer and thru the original holes in the bracing that separates the woofer from where the crossovers are .  I kept this setup until my experimenting with the single speaker wiring showed me that while It seemed like I was hearing a more dynamic sound over time I discovered that there was a graininess to it after going back to using Cardas Neutral Reference speaker cables I decided to try twisting the internal wires  into +/- pairs like the the wiring in Thiel speakers (if you remember my speakers had 16awg wires constructed with +/- running together in parallel , one reason that I started the upgrading) , this resulted in a smoother sound .

Maybe the 3 wire single polarity twist will solve the graininess .  I look forward to your findings on this setup .    

Robert - As I recall your parallel internal wires were MonsterCable or equivalent. Twisted pairs (as in stock Thiel) address the relevant problems, plus they are what Jim designed with, considering their inherent capacitance, inductance and resistance. If I land on Kimber MST or the Iconoclast equivalent, there may be crossover adjustments for the differences in C/L/R from stock wire. These braided runs resolve propagation effects differently than twisted pair; fans believe they do so more elegantly. It seems these effects are too subtle and/or complex to be modeled in obvious ways. I had previously dismissed them due to my lack of understanding of the interacting variables. Ray has encouraged me to include them in my trials.

Previously I had auditioned the Iconoclast braided conductor speaker wire. It is excellent albeit very expensive. I have approached them about virtues and problems with their wire as single runs rather than the +/- runs that I auditioned. And the beat goes on.