2. amps-preamps
  3. 181941-2029

Impedance and Sensitivity

Hi All,

I have made a move from inefficient speakers and large amps with high current supply to smaller amps and more efficient speakers. Think like 300 to 500 WPC at 8 ohms changing to 25 or 50 WPC at 8 ohms and speaker efficiency increasing to 98 or 100 Dbl from 87 Dbl.

I have always kept an eye on the output impedance of the preamp compared to the input impedance of the amp. I understood that if the input impedance of the amp was not at least 10X of the output impedance of the preamp, I could experience a negative impact on the bass response of my system.

As I try different preamps and amps with more efficient speakers, I have run into a new problem. This problem is that the gain of one of my preamps is 26dbl and, pairing it with a tube amp with an input sensitivity of 0.5 volts, results in not being able to adjust the preamp volume control so that my system plays more quietly. I run out of clicks for it to play more quietly.

I realize that either a preamp or a amp change can fix this. Not sure if in line attenuators is an answer as I suspect it adds a distortion or tonal coloration.

In the meantime...does this "gain" imbalance impact sound quality or is it just a loudness problem?

Thanks for listening,

Dsper

 

 

 

 

dsper
holmz's avatar
holmz
2,328 posts
 

Mostly loudness.
More than a few modern amps can be set for 20 or 26 dB of gain.

My preamp has a switch to add in +10 of gain for driving say a 20dB gain amp.

It is always nice when the low level volume is around 9 o’clock and we never hit full volume when we want to crank it.

 

More importantly though, do the new speakers sound any better than the old ones?

ditusa's avatar
ditusa
1,883 posts
 

What speakers do you have?

Mike

dsper OP
663 posts
 

Playing with Klipsch Forte iv's and Zu Soul Supremes right now. 

gryphongryph
372 posts
 

I ran into this problem with my pre and power amp, my temporary solution has been in line attenuators 10db on my power amp input.

it works and I can not hear any degradation of sound quality, but I still don’t have a lot of volume adjustment before it gets too loud.

First my plan is to get a new dac as it also has a high output 4v.

Have my eye on a dac with a tube output at 1.5v which should maybe help my situation. Also have a dream power amp in future that has variable input gain but that is for when times get better economy wise.

More to discover