Quad panel outlet - can I do one circuit on this?

It's not about availability of power to meet all the needs of the audio gear, which is generally not very much.

I had 2 600 W mono blocks, a 5 channel amplifier, tv, AV processor, preamp, Power conditioner, a few lights, modem, router, weather station and a couple network switches all living off of a 15 amp circuit with lots of room to spare I believe. Sounds good.  Then I added 2 dedicated circuits with 10 gauge wire for all the audio gear and it has been noticeable in a very favorable way.

It's about the clarity and isolation of the electricity and making sure less restricted Power availability is always there which is enhanced with a higher gauge electrical wire.

It's about the clarity and isolation of the electricity and making sure less restricted Power availability is always there which is enhanced with a higher gauge electrical wire.

I have not once made any claims whatsoever to have a real tight grasp on this subject, and when I ran three dedicated lines it was because I perceived things as you stated above.  However, there does appear to be two points of view on this subject, and one of those POVs seems to feel that what happens at the neutral/ground bar with multiple circuits is not desirable.  In my own recent experience, I believe that I am preferring what I am hearing by only using one circuit.  However, with that typed, I do intend on listening on all three dedicated circuits again to see if I actually do hear degradation, no change, or an improvement.

But not tonight.

a few lights, modem, router, weather station and a couple network switches all living off of a 15 amp circuit with lots of room to spare I believe. Sounds good.  Then I added 2 dedicated circuits with 10 gauge wire for all the audio gear and it has been noticeable in a very favorable way.

. . . and it might not be the multiple circuits and the 10 gauge wire that made the improvement . . . it might be all the crap that you got off of the audio circuit(s). 

A dedicated circuit is a dedicated circuit until you muck it up by adding a space heater to the same quad box your preamp is on. Don’t ask me how I know this.

But @curiousjim , I must ask:  how DO you know this??

@jumia  , now I am the one who is confused.  This, below, indicates that you have two multibranch circuits, not two dedicated circuits?

and while 2 dedicated circuits would be highly preferable I’m not sure existing multi branch configuration I have is achieving anywhere near what 2 dedicated circuits would achieve.

Then I added 2 dedicated circuits with 10 gauge wire for all the audio gear and it has been noticeable in a very favorable way.