2. vintage
  3. 182171-170624

system synergy and problems with SQ

I have been trying to build a system out of new and used components and have persistent problems with unsatisfying sound. Can you help me figure out what is wrong?

 

The system:

Old Kenwood KD 5070 turntable with Ortofon Blue, Bellari 129 preamp with Gold Lion tube (did some tube rolling and this greatly improved the harsh highs), Audio Research LS25 mkII preamp, Adcom GFA 555 II power amp, Speakers either Celestion ls700 se or Bowers and Wilkins 803 matrix series II. For digital, Qutest DAC fed by Audirvana/Qobuz on a Mac Powerbook.

 

On good recordings the Celesions give a wonderful sound stage / instrument separation with vinyl. Their rendition of instrument timbre is really captivating. The B and W are more detailed in the highs, so provide realism that way, but have no rolloff and are harsh on a lot of records. Their soundstage is OK but not as good as the Celestions. Digital sources pretty much the same differences, but imaging is not as impressive with either speaker. The problem is that the B and W are often harsh, the Celestions are amazing for recordings with a few instruments but can’t handle full orchestra at reasonable volume. Sound is harsh. Is it the vinyl and the tubes that are producing the imaging magic? Can the Celestions handle volume and many instruments if I change something? Will a new phono preamp fix this? Thanks a lot for your help!

arhgef
holmz's avatar
holmz
2,328 posts
 

Does the preamp have a headphone jack?

 

russ69's avatar
russ69
3,360 posts
 

I think an ARC/Adcom/B&W would not be a great combo. That tilts to the lean and dry sound. The speakers can be great, the Adcom is not that bad, but the ARC pre is flattening things out. I'd go with a Cary pre or another preamp known for their liveliness, maybe a Conrad Johnson. Then I'd go amp shopping. 

arhgef OP
52 posts
 

No headphone jack. That would be a good test. I am surprised the ARC coukd be the issue as it is a tube preamp. I have a simple volume knob from Schiit that I can use to run without the pre, and will check. Also tried a Classe Sigma 2200i integrated, which made the problem much worse, I guess because it is a class D. Will do some more process of elimination as people suggest. Thanks much for your help. 

holmz's avatar
holmz
2,328 posts
 

No headphone jack. That would be a good test. I am surprised the ARC coukd be the issue as it is a tube preamp. I have a simple volume knob from Schiit that I can use to run without the pre, and will check.

^that^ could exonerate or point to the preamp… so it makes a lot of sense to try it.
(Tubes sometimes need replacement)
And it also takes out the TT, cart, phono… so it is a double dose of being able to get closer to finding root cause.

hoytis
85 posts
 

Curious...what do you have the gain set to on LS25? Also, have you taken the Bellari out of the mix and just used the internal phono on the LS25?

More to discover