Anyone tried fiber into EtherRegen SFP?


Putting a 2nd-hand EtherRegen before my Innuos Zenith Mk3 has probably been the single best upgrade I've made.  Like most others' experiences, the shift away from a digital sound has been palpable.

I'm feeding the ER directly from my Netgear Orbi mesh satellite through a Wireworld Starlight ethernet cable.  I was wondering, however, if anyone has experienced significant gains from feeding the ER with fiber into its SFP port? 

I did assume initially that as the ER is a regenerator the quality of the input shouldn't matter that much.  But as I saw another jump when upgrading the ER's input cable it's set me to wondering about optical.

 

128x128lollipopguild

That is true and an important point. I use optical as my router is 100+ ft from the ER.  I needed to try and consult with people on several different converters prior to settling.  Difference in SQ was obvious. 

A lot of people are doing this now. Jon Swenson (eR designer) recommended using an FMC in front of the fibre. Which is what the EtherRegen does in reverse order, B > A.

I do this in one of my streamers. Since I do this and fibre I do not care about the crap on the bad side of the eR moat.

Some of the official sound police engineers on A’gon like to say the Swenson is a quake but for me the improvement in sound is real ducky.

BTW - fibre is all I use it it very easy to hear improvements with fibre in my setup. As I said before I have a alot of crap on the bad side of the fibre. The fibre and FMC clean this noise up, so the noise does not get into the DAC. How can I tell? I just replace the fibre for Ethernet and listen.

I am using a WireWorld Platinum 8 from my modem to the etherRegen. I guess just the opposite of what you asked.

From the etherRegen, I am running fiber to my Lumin X1. Way better sounding than with ethernet, I am also using the After Dark clock.

ozzy

I tried the eR with both my Lumin X1 and Musetec 005 DAC + Sonore OpticalRendu (both fibre solutions).