Hi @markush !
Yes, just in front of the Lumin. Ken
Streaming Sound Quality - Want the very best sound quality? Network Acoustics ENO...
Hi @markush ! Yes, just in front of the Lumin. Ken |
I've been using the ENO system running from an ethernet switch into my Mojo Audio Deja Vu server, which has JCAT Net XE and USB XE cards. When I reboot my Deja Vu with the ENO system connecting between the switch and the Deja Vu I don't get an ethernet connection, so no Roon, no streaming. If I reboot with the CAT 8 ethernet cable from my router (1000 mbs service) plugged directly into the Deja Vu, it reboots fine with ethernet connection. I then have to remove that cable from the Deja Vu and plut it into my switch and then hook up the ENO system (from switch to Deja Vu server and all is good (seems like once the ethernet connection to the Deja VU is opened up Ican change ethernet connections back and forth with no problem). I assume this issue is because the JCAT NET XE wants a 1000 mps connection when rebooting rather than the 100 mps connection of the ENO. At some point in the near future I hope to upgrade to the Muon Pro and I think that will resolve the problem. Have others had the same issue and did the Muon Pro resolve it? |
Muon Pro has been designed to work with streamer that requires 1Gb/s Ethernet connection speed. Your JCAT Net XE is seeing ENO as bottleneck hence the connection/speed issues. There are few here who experienced the same issue as you and switching to Muon Pro not only got rid of the problem but also further enhanced the performance. |
@lalitk Thank you. I look forward to the two-fer of having more convenience and improved sound! |
I have the same Deja Vu server with the same JCAT NET CARD XE. I own both the eno and the muon (non PRO model) and both of those filters work fine with my server, coming out of a Silent Angel Bonn N8 Ethernet Switch. However, my internet service is only 200 mbs. Is your 1Gb/s Ethernet cable coming out of a switch that does not accommodate 100 mbs? I did have the same issue as you when I was running fiber through 1,000 mbs convertors and per Rich Truss at Network Acoustics, I had to purchase convertors that maxed out at 100 mbs. I did that and it then worked fine. I now run Ethernet directly from my router into the Bonn N8 switch and then into the muon. Based on the amber color of the light on the switch, it is only operating at 100 mbs into the muon, but it works and sounds just fine. I wish they would just stop coming out with new stuff for us to purchase. |