2. speakers
  3. 182859-520

Sensitivity 86 v 90

I am considering an upgrade from speakers with a sensitivity rating of 90 db, 4 ohms, to larger speakers rated at 86db, 8 ohms nominal.  Same brand, PMC. My tube integrated amp is 80-112 watts triode/ultralinear, and it’s fine for my 90 db speakers.  Although, it is sometimes at around 4 o’clock on the volume control, approaching the max at 6.  I am aware of the “amp power must double for each 3db increase in volume” rule of thumb, but really have no practical experience with this.  I do like having 90 db efficiency, always assumed that meant a less powerful amp would suffice. 

   My question is, would the decreased efficiency be a concern? 

128x128lloydc
nonoise's avatar
nonoise
10,971 posts
 

After all that was mentioned before I posted, I made the same, dumb mistake of citing efficiency instead of sensitivity. Everything still applies. 

All the best,
Nonoise

ashoka
101 posts
 

Take home listening test. Have mobil app to test dB of speakers take avarege reading at standard condition.

audioman58's avatar
audioman58
4,231 posts
 

Yes it is a issue if you are pushing the volume now ,then you will be running the amplifier into its highest distortion which can damage yours speakers as well as your amp, find a speaker around 90 db there are plenty of them out there 

Even if you have to wait and save more Monies , we’ll worth the wait 

or get rid of the amp and get a bigger one.

carlsbad's avatar
carlsbad
1,551 posts
 

Another thread with a lof of misinformation in it. I especially like the misinormation with exclamation points.

oltexan
35 posts
 

I would be concerned. Tube amps don't usually double in power from 8 to 4 ohms so moving to 8 ohm speakers will probably give you even less total power to work with. Especially if you're already almost max'ed out.

More to discover