Why HiFi Gear Measurements Are Misleading (yes ASR talking to you…)

@amir_asr

Problem is, when most of you are put to blind tests, you flunk being able to tell the source from the compressed one. And no, resolving system has nothing to do with it. The fact that you say that tells me you don’t know what it takes to hear such differences. As a trained listener in this domain, I can tell differences with just about any headphone on any system.

Yes, this is, I find, one of the most common myths among audiophiles. Whenever someone raises skeptical doubts about claims made about, say the audible character of cables, the response if the skeptic doesn’t agree is the "ears or gear" - either you don’t have the hearing acuity the Golden Eared Audiophile does, or your system just isn’t "resolving enough" like you need a "super resolving system" to hear these differences.

There are various problems with this idea:

1. Subtle sonic differences, if real, can be heard across a large range of transducers. Sure we can get to something like the worst laptop audio or whatever, but it really doesn’t take THAT much to produce speakers on which you can hear very subtle differences. I’ve worked in tons of different studio conditions, different monitors, headphones of varying quality and ALL have allowed me to hear and make the subtle changes I need to for my job. Give me an old pair of radio shack minimus 7 speakers and if I do a subtle EQ tweak to bring out the upper mids, you will hear it!

2. The type of sonic differences often ascribed to (for instance) cables is often fairly dramatic - the "highs opening up" the bass becoming more punchy or extended, more forward in tonal balance, more laid back etc. These are all qualities, if that obvious, should be audible on most speakers. It’s why different mastering is obvious on most speakers, from cheap to expensive.

3. We have audiophiles reporting these "obvious sonic differences" across a wide range of systems and speakers. It’s not just the well-heeled audiophiles with the Super Resolving Systems. Just go to the typical amazon page for some set of audiophile cables (even not expensive ones) and you’ll see audiophiles with very modest systems reporting "obvious differences" with the cables in question.

From this you have either two implications for those making the Resolving System demand:

A. It’s a red herring to demand that someone must own a Very Resolving System in order to evaluate whether a cable is making a difference.

Or:

B. If these differences aren’t obvious on less resolving systems, plenty of those audiophiles with modestly ’resolving’ systems are imagining they are hearing differences between cables. Which would only emphasize the problem variable of listener bias in the first place.

@andy2 

Amir has claimed that he personally listened to "200" pieces of equipment per years.  That is around 366/200 or 1.5 days per equipment.  I mean come on who in the world can take you seriously if you only spend such a short time evaluating an equipment.

In comparison, people at Stereophile spend weeks on an particular equipment before they publish the review.

They can spend months and it wouldn't make their reviews reliable.  If you know what you are doing, including science and engineering of the gear and what the measurements show, you can zoom in and find issues.  You don't sit there listen to random track after random music for weeks.  That tells you nothing.

Every one of my listening tests uses the same, revealing and proper tracks. I focus on what measurements say is wrong with the unit and test level of audibility.  A headphone amp that has too little power with high impedance gets tested that way.  And with content designed to find audible issues.

Same gear is tested by one of your favorite reviewers reads like a music review.  Oh listen to this album and that album.  What?  I want to know what the equipment is doing, not what music you listen to.  

Proper research has been performed to find such tracks.  See this:

You need to stop listening to your lay intuition and embrace science of how to do such evaluations correctly.  Formal testing shows long term listening to be much less revealing than instantaneous ones.  See this published research on that:

I implore to you start paying attention to decades of research on what it takes to properly evaluate audio gear.  The lay understanding and intuition stuff needs to go out the window.

@andy2 

That is because a good tube amp will cost a lot more money compared to a SS amp.  To get the same performance you need to spend quite a bit more.  If money is not an issue, most people would go with tube.

Back to the myth that money buys performance.  It can, but you only know it if you measure.

That aside, almost all content you listen to was created and approved by the talent using solid state electronics.  Is your claim that they heard it with haze?  If so, that haze must be part of the experience they want you to have!  Best to leave it just like guitar distortion.  :)

@amir_asr

They can spend months and it wouldn’t make their reviews reliable. If you know what you are doing, including science and engineering of the gear and what the measurements show, you can zoom in and find issues. You don’t sit there listen to random track after random music for weeks. That tells you nothing.

More time spent on a task can net better results. This is not always true. However, when it comes to listening (headphones, speakers, DACs, amps etc.) spending more time evaluating a product before releasing a review can help in a few key ways:

1) Testing for Reliability

2) Features & Functionality

3) Overall sound quality analysis

4) Small important details

I’m sure that most of these people doing reviews have a standard set of reference tracks; or at least a background/strong interest in audio; enough so to make their impressions reliable. They were hired to do a task and might be very good at it. We have no way of knowing how much audio knowledge they have...

Tyll Hertsens - of innerfidelity (now defunct) was probably the best reviewer of headphones on the net. Like I said in one of my discussions, he took time to describe what each headphone sounded like with a particular track. He also did measurements and highlighted key areas in the frequency response or octaves where performance could have been better...while still quoting the measurements he took. And on top of all this, comparing it headphones in the same price-range with the same factor - open/closed back!

Since he went above and beyond, this gives a potential customer huge insights! You can go ahead and test with the same track. You can wait a week, be really busy, visit an audio shop, listen to that headphone (or headphones) and jot down your impressions on the notepad app your phone has installed.

Then you can compare and contrast your review with his - figure out if this headphone is worth the money for you. I’m sure that anyone who has bought audio products based on solid reviews like his will agree...

Now back to reviews...I bought a SABAJ A10h based on your review. I also bought a DROP THX789 based on your review. In both cases, not only did I find that output power was severely lacking; each of them also had their own sound signature. Based on your measurements and overall write-up of both units, a potential buyer would actually believe that each of them were a wire with gain!

Please see my profile for a photo that illustrates this. Looking inside one of these devices tells you it is cheap to build. Uses an OP amp and tons of subtractive distortion limiting - like negative feedback in a circuit. Tons of this, much like dynamic range compression in mastering will limit perceived dynamic range in a track. You’ve got to wonder how they put something together at that price-point and sold it. You can easily look up parts by just looking inside a unit and doing a parts inventory check...they are both not state-of-the-art ! lol

Alright..you can have your cake and eat it too! All I’m saying is....live and let live. Your tone and how you almost bully people into listening to you is rather rude. Hence why virtually every audio forum on the web has labelled you all kinds of silly names.

You need to stop listening to your lay intuition and embrace science of how to do such evaluations correctly. Formal testing shows long term listening to be much less revealing than instantaneous ones. See this published research on that:

I implore to you start paying attention to decades of research on what it takes to properly evaluate audio gear. The lay understanding and intuition stuff needs to go out the window.

Well, I am very curious to hear any system that was assembled through blind testing of its individual components....