2. analog
  3. 176743-41852

Phono Stage upgrade to complement Dohmann Helix One Mk 2

Thanks to the recommendations from many users on this Audiogon blog, I think I was able to make a more informed purchase of a turntable, the Dohmann Helix One Mk 2.  I've really been enjoying the turntable for the past month!  

The next phase of my system now needs attention:  the phono stage.  Currently, I'm using a Manley Steelhead v2 running into an Ypsilon PST-100 Mk2 SE pre-amplifier (into Ypsilon Hyperion monoblocks, into Sound Lab M745PX electrostatic speakers). 

I've been told that I could really improve my system by upgrading the phono stage from the Manley Steelhead (although I've also been told that the Manley Steelhead is one of the best phono stages ever made).  
Interestingly, two of the top phono stages that I'm considering require a step-up transformer (SUT).  I'm not fully informed about any inherent advantages or disadvantages of using an SUT versus connecting directly to the phono stage itself.  

I suppose my current top two considerations for a phono stage are the Ypsilon VPS-100 and the EM/IA  LR Phono Corrector, both of which utilize an SUT.  I don't have a particular price range, but I find it hard to spend $100k on stereo components, so I'm probably looking in the $15k - $70k price range. 
Thanks. 

drbond
sksos
162 posts
 

@drbond  stated on 4/29/2022 11:39 "Thanks for the recommendations, but both the CS Port C2 EQM 2 and the EMT 128 (both of which are but phono stages, and look like high quahily products) only have one input.  With my two tonearms, I would prefer a phono stage with two inputs". 

 

Yes this thread hasn't seen replies for over 2 months but I was searching for info on the CS Port phono eq C2EQM2 b/c thinking of getting one in to hear and saw drbond's comment regarding it. From the CS Port website it states: One MC and two MM cartridges are also supported, three inputs in total. Just thought I'd set the record straight. 

lewm
13,298 posts
 

As Mijostyn knows, I too use Sound Lab speakers, the 845PXs. The "backplate", in Sound Lab parlance, is where the bass and treble audio step up transformers and the passive crossover network that divides the frequencies that drive them, are housed. In my speakers, the components of the backplate are highly modified to save amplifier power and to provide for a high input impedance favorable to my Atma-sphere amplifiers. Funnily enough, the Atma-sphere amplifiers in this system are driven by Raul’s 3160 Phonolinepreamp, most of the time, also by my Atma-sphere MP1, and sometimes by my BMC MCCI ULN SE. (The aforementioned Steelhead drives a Beveridge 2SW-based system in my basement.)

By the way, I think Mike Lavigne owns the CS Port phono.

sksos
162 posts
 

By the way, I think Mike Lavigne owns the CS Port phono.

Yes, Mike does and really likes the CS Port phono. Have PM him via WBF and quickly discussed. It's one of the reasons I'm thinking of it, his opinion is highly thought of.

mijostyn's avatar
mijostyn
8,570 posts
 

@sksos , For what it is worth, I think you are much better of with @drbond 's choice The Dohmann Helix 1 or 2 with a Schroder, Reed or Kuzma arm. The motor, plater and tonearm are rigidly connected and placed on arguably the best isolation platform in existence. I am probably going to get one. I am waiting for them to develop the vacuum clamping. I will put a Schoder LT on it.  

lewm
13,298 posts
 

Mike, I assume Skos is referring to and thinking of buying the CS Port phono stage, not the TT.  But I could be wrong.

More to discover