Grimm MU1 Streamer - Really "The Best"?


I've recently become interested in the Grimm MU1.  While reviews of top end players from Innuos, Aurender and Antipodes and others are typically all very positive, the tone of the many pro reviews of the Grimm MU1 go far, far beyond, with some reviews resorting to using superlatives and gushing of positive system transformation and not being able to stop listening to material, etc..  HiFi Advice and Steve Huff (actually calls it "magic") have such reviews.

Given the delay in availability of the Innuos Pulsar which I'm told will be better than my current Zenith Mk3 + PhoenixUSB reclocker, I am interested in replacing my streaming setup with a one-box solution that includes a high-precision clock.  The new streamer will continue to feed my Gryphon Diablo 300's DAC module, which I have no interest in replacing.

I'm actually a fan of Innuos, after they improved the sound of my Zenith with firmware updates and after I added their PhoenixUSB reclocker. I appreciate this commitment to improving sound quality which is why I was so interested in the Pulsar.

The trigger for considering an upgrade is not for improved sound, but rather, to solve some issues I have with too many Audioquest power cords coiled and clumped together. I will get to lose one of them and one of my USB cords with a one-box streamer. I've noticed my sound is very sensitive to positioning of my AC cords and find I often need to re-adjust the PC feeding my amp to get proper sounding vocals at center stage.  One of my subs also seems to be picking up AC noise when the crossover is set above 60Hz. The second trigger is simply system simplification, removing one box.  All that said I don't really have any complaints regarding sound, and the PhoenixUSB reclocker truly did improve the sound of my Zenith.

While the Grimm MU1 has it's 4X upsampling up it's sleeve with reviewers absolutely glowing over this feature and it's extreme ability to separate tones to the left, right, front, and back far better than the rest, I don't see that Grimm has gone to any lengths with regard to power supply management in the way other brands do including Innuos. The MU1's ultra-simplistic interior doesn't bug me, but the lack of transformers and power management makes me wonder....

Are there any updates from folks who have directly compared the MU1 vs similarly classed streamers from the competition?  Did you find it to be as revelatory as the pro reviewers found it? And, how does it compare to other streamers with it's 4X upsampling disabled?  Does it sound like it suffers from it's lack of power management?  I do see that the clock should be very good...

 

 

nyev

“It’s perplexing how it can be so revealing while totally avoiding sounding lean and while being so musically engaging.”

@nyev

In my experience it is not! You are probably experiencing a complete transformation with Tambaqui DAC. A purpose built onboard DAC is exactly that regardless of its cost and not without its limitations which are only exposed once you have the opportunity to compare it with a well executed SOTA DAC like Tambaqui. You know the age old debate, Integrated vs Separates. There is a reason why separates (pre, amp, DAC, streamer) continues to exist and thrive in high performance systems. I read somewhere not too long ago, unless you’re a true music aficionado, an external DAC or a streamer is just an additional expense…..well what do you say to that :-)

You started out this journey by stating something like, “I prefer not to add more boxes and the additional expense of cabling”. The million dollar question now is, once you’ve heard Tambaqui DAC + MU1 at more than twice the cost of your existing setup, will you be going back to Innuos + Gryphon DAC? Is this Transformation worth the additional cost?????

H @lalitk , “transformative” is a good word that I would apply to how I would describe the magnitude of difference that the Tambaqui brings. That said, I normally would use that word for when anyone, not just me, and not just audiophiles, would notice the magnitude of difference in quality. Upgrading my speakers did that in my house. As did my amp. But my family has not commented on the sound since adding the Mola Mola. That said, for me, I continue to be amazed. It’s got the quietness of a high end power conditioner, but none of the constraints on the sound that I found those products all are affected by. And it just gets closer to the sound of actual music vs a digital HIFi system. This morning I did a few back and forths with my Gryphon DAC, which lists for USD $6,000. My initial reaction to going back was “oh that is nice and smooth sounding”. But one moment later I was realizing that the smoothness was simply less musical information coming through, that the sound was less defined, that the bass was more big and round but far less resolute and driving, and that it was tougher to follow the music.

My objectives did evolve in this thread based on discussion, thanks to @ghasley’s suggestions. That said, I only expand the number of cables significantly if I stay with my Innuos server + reclocker solution. If the MU1 is better, it will replace both Innuos boxes and I will be at the same number of boxes as I was at when I started out. The balanced interconnect was an extra cable however.  There is still an off-chance that the MU1 will lift the Gryphon DAC to the extent the Tambaqui is not needed.  But I think the chances of that might be slim.

Currently, the Tambaqui is feeling really special; I like it as much as my Gryphon amp. I’ve not felt that way about any other components in my system, even though some do a really excellent job too (PhoenixNET, Torus, etc).

Back to the MU1, it will be interesting if it is an upgrade from my two Innuos boxes. Christiaan at HiFi Advice has said that subsequent revisions of hardware, software and Roon have changed the MU1 since his review. And one comment I saw was that Roon 2.0 did cause the MU1 to become more subdued which was less to his liking. He said he’s stopped using the MU1 as a lead reference because of how Roon updates can cause swings in sound quality. One disadvantage of the MU1 to be aware of I guess. At least, until Grimm provides alternative and more stable sounding player software support as an alternative to Roon.

I just looked up the Grimm MU1. Retail price $12,500 without any internal SSD included. Wow! Pricey. A couple of observations:

1) Processor: Intel i3 2-Core. Definitely sufficient for Roon with no DSP, and with not a huge Roon library. But certainly not very powerful for those who use DSP (not me) and with big libraries

2) Memory: 4MB RAM. Again, not impressive.

3) No USB audio (to DAC) output. Hmmmm…. 
4) I don’t see any proprietary streaming software/ music management program (like Innuos Sense). Roon OK, I get that, but then you are at the mercy of Roon for everything.

I am definitely curious about Grimm, given the reports & reviews, but these observations give me pause. A friend of mine ordered one a few days ago, so I should be able to learn more from “real life” experiences in a few weeks.

@thyname , yes the Grimm is known for doing more with less, and the price did just go up $2,500 right after I bought it. Being hostage to Roon updates with potential impacts to sound is somewhat mitigated by the fact that the MU1 takes control and Roon does less to the sound than in most cases. At least so I’ve read. But as I said above the MU1 apparently IS subject to SQ variances with Roon updates.

I would imagine Grimm is hard at work developing the support to use an alternate player, or even their own player. Maybe it will coincide with the launch of the MU2 player/DAC combo?

Of all its weaknesses you mentioned, this is the only one I really care about.  

@nyev : of course, we all make purchase decisions based on what matters to us. I fully understand that. I will be curious to learn about your experience once you get it, especially as it pertains to comparing with your Innuos ZENith MK3. I have to say though, you change & swap things around so often, in a very short period of time (by my standards). I would personally have a hard time fully grasping how something sounds for such a short period of time, especially when so many other components in the chain are also being swapped at the same time 🤷‍♂️

 

How do you plan to connect the Grimm MU1 to your Tambaqui?