Absorption, Diffusion or a combination of it all?


Looking to add more acoustic treatment on the wall behind the speakers. Currently using GIK absorption panels (242). 
Planning to add two more panels that would hang pretty much directly behind the speakers on the upper part of the wall (higher quality image on my system page). 
Any benefit going with diffusors?

Thanks!!!

128x128audphile1

Or, don't bother with either and simply enjoy music with a bit of room sound.

Thanks Kota1. That was a great video. It's over an hour and I watched the full thing while picking out pearls of wisdom that may improve my own setup. Thanks Anthony and Audiohaulics for the video too.

@leggs 

After watching that video I moved the treatments I already had to the suggested locations, wow! I previously had absorption on the front wall in addition to those bass traps in the corners (pics in my  profile). I replaced the absorption panels with two combo panels and big difference. 
Then I followed the rest of the "recipe" interleafing absorbers and diffusors, etc. I bought most of my treatments through auralex and found great results at reasonbale prices, especially the diffusors. If I were starting from scratch I would just get a room kit from anthony's company, www.sonitususa.com.

In acoustical terms 99% of our rooms are small - 30x20x12 or 15x13x8 both are small acoustically speaking. However those two room sizes will require different approaches. Small room acoustics are very challenging.

The challenge is to get the most out of your space and spkr placement / listening position and addressing room acoustics are the single biggest influence on a system, more than any piece or gear IMHO. I’m not into HT, only 2-chnl, but generally speaking many of the same principles apply

  • Addressing bass is prob first priority along with first reflections. Putting pillows and or thin 2-4" panels in corners will do nothing to the lower bass region.
  • Using only absorption (a lot of it) wont give you a balanced / linear response, so a balance of absorption and diffusion is needed.
    • Unless you are building a room from scratch and designing true corner trapping via a acoustician, floor to ceiling bass traps in corners (tube traps, tri-traps etc) are a good starting point.
    • 4-6" broadband at first reflections AND ceiling. Treating the ceiling is very overlooked. Its actually "free" real-estate
    • Diffusion > this is tricky as this can be applied to various areas, but can also create a lot of problems if not done correctly. I would get advice on how to implement this, but on ceiling and front wall are good spots. The back wall (behind you) is also good, but req minimum distances to listening position
    • Multi subs give tremendous value and impact for the bass/sub bass region.

These are just some basic ideas, but get a mic and REW and measure your room is where I’d start. Also, I think its a matter of priorities as well. If you are fine with "whatever" and it sounds fine, that’s cool. If you want the very most from your system and are willing to put in the time, you must deal with spkr positioning and room acoustics, no way around it.

DSP and the like are also no substitution / fix. Get the above right first, then if one wants to dabble with DSP, that comes last IMHO.