Lampizator Questions


Hello All-

I’m wondering if there are any long time Lampizator owners here that might be able to answer a few questions I have about the product line specifically with regards to the nuances of tube rolling, the digital boards and the build quality between models.

designsfx

@chilehed 

I like your system- straightforward digital! It’s good to hear that you’ve not experienced any type of distortion issues while using the high gain setting without the volume control version of the Baltic as I’ve read that the high gain setting on the Baltic is 6v (which seems high). I’m wondering if there would be a difference between your preamp and the one I own or if running at the low output setting would work. Seems the level adjustment options are different with the volume control units. Either way- Congrats on your system!

My Pacific with VC ran direct to Aries Cerat Essentia amps.  My Horizon also runs directly to Amps.  IMO, the pre-amp portion of the P and the H are good enough to where you do not need a Preamp.

 

@tannoy56 

There was no real "switch" to or from DHT DACs.   LampizatOr DACs have always come with a variety of different tubes utilized.  If you look at the brand history you'll see everything from 6sn7/vt99s, to 12au7, 6n6p, 4p1l, dhts, pentodes, and even some large and unusual indirectly heated tubes.  

Each type of tube requires different kinds of design concerns and solutions.  Here is a video of Lukasz discussing the tube decision for pentodes in Horizon;  https://youtu.be/ha_ltmaGu20

@lampizatorna, willgolf For most of the years of Lampizator existents -since 2005, they were making DAC’s with triode tubes but not DHT. When luka came to the US, he was convinced by small audiophile group, in San Fransisco, to produce a DAC with DHT. That’s were the name Golden Gate came about. Since then, Lampi continue to make only DHT DAC’s, until the new flagship Horizon. Don’t get me wrong. I own and love Lampi DAC’s, but was wondering about why, all of a certain, Lampi is using again IHT tubes design? After all, any good tube circuit designer begins with careful selection of tubes. Why Luka selected IHT tube today, after glorifying the sound of DHT design for quite a few years?

@designsfx , thanks. No distortion from either position. As @willgolf mentioned, there is an enthusiastic and active group of Lampi owners on WBF. If you have your eye on a particular model and have a specific question you can probably get more perspective over there. If there is something I can tell you about my preamp that might provide insight to how yours might perform please let me know.