The best plug in filter ever!

Justubes2

Ozzy found in his system that they worked better without the HFC. I use them with the HFC products and like them just fine. For me where they are placed in the system makes the bigger difference. Near or on the wall before the power conditioners best for me.I also found that on the power line that my front end of my system was better than on a amp line.(I got a improvement at the amp) but it was a bigger improvement at the front end side. I use the same splitters and have many HFC products plugged in to them along with the Puron filters.

Ozzy is very good at what he does with his system. So you should try them with out the HFC products. then maybe add them back in later at different location on your power line. Just remember the HFC products take a little time to settle back in after removing.

Good luck

Good Afternoon 

Orders in house are all shipping and will track tonight. 

DHL threw a new curve ball at us - but thanks to some good DHL'ers in the Midwest and here in Dallas we are good.

Next large scale shipment even easier now. 

Thanks to all for your support

Mark 

These Puron’s are really something!

On my video dedicated line I have 3 Puron’s. Yesterday I watched the Terminator Blu ray on my Oppo 205. What amazing picture quality! There is a close-up scene on Kyle Reese face, on his chin he has a scar, but now this scar looks like a stick-on scar or a leech.

Anyway, the Puron’s really bring out the image quality.

ozzy

@ozzy 

We have some incredible results on our 85" SONY 

Same for our High End LG - very pleased

Glad to see Puron being used in this manner

Best to all - Mark 

The short version of this post: using a T adapter (from justubes, 5/2) inserted into a Fuse Box, a PURON can be placed into one of its plugs.  The resulting sound is spectacular, bringing you even "closer to the music."  Only continue reading if you want more.

I had been using two PURONS in a Synergistic Research Powercell 12 conditioner, and one PURON in the wall, in the same duplex as the conditioner.  This was a well-established baseline, over at least ten hours of dedicated listening.  I then removed the PURON that was furthest away from the power cord (end) of the unit.  I noticed a decrease in volume and a sense of restricted dynamics.  

I plugged the T adapter into the Fuse Box, and inserted the power cord that was connected to the electronics (creating a straight line).  The other end of the Fuse Box, and the shorter power cord running to the Powercell 12, remained unchanged.

The resulting sound was head and shoulders better than when the process started.  It was as if all of the wonderful attributes that others have attributed to both Fuse Box and PURON were enhanced by their proximity.

The PURON into the T adapter faces into the room.  The blank (opposite) side is next to a wall.  Yes, the weight of the PURON must be supported.  Yes, I am thinking about what a replacement (an additional) PURON might do for me...

So, onward and upward.  Just when you are marvelling at what you are hearing, new ways of employing these devices keep pushing the envelope.  Thank you, Mark!