Bricasti MDX upgrade

Search the forum here, as the MDX board upgrade is many years old now so there are lots of comments within a few threads and other conversations.
I’ll be interested to know if you find any negative comments at all. Bricasti does solid R&D for upgrades and the price is always good compared to others. 

Wait… if you already have the MDX board, then the next numerical upgrade is a firmware upgrade. Right? There has not been a second MDX, right? 

Yes, I have the board and yes you are correct.

I checked with Bricasti.

The upgrade is firmware!

Easy to do.  Brian thought it would add two more filters and that is about all.

They are such a pleasure to deal with

I also installed the Bricasti MDx upgrade board in my Bricasti M21. My system sounds clearer, smoother, more engaging with more musical details. I like it very much and also recommend the MDx board upgrade.

Please read the instructions carefully since it requires you disconnect some cables, remove the old board and install the new board. I had someone help me and the job took about 45 minutes (we moved very slowly).  
 

I also ordered the Bricasti V1.11 MDx Upgrade for my Bricasti M21 DAC (also M1SE, M3) and installed it

In addition to the improved in performance that the MDx offers, there 2 new features in V1.11 for all products upgraded from early MDx versions:

CLK Wide / Fine: On all products is the ability to change the Master clock sync from a fine very accurate setting to a more forgiving wide one, yielding a more relaxed sound and to allow for fine tuning of this change. Both settings yield very low jitter results.

Filter 1: For the M3, M12 and M21 products, the addition of 2 new filters, one for each type linear and minimum phase. These filters are currently found in the M1 and were found to be customer favorites and we feel would be welcome addition to the current simple 2 filters approach in those products.

As per Bricasti’s SIM Chip instructions, I removed the cover of my M21 DAC and inserted the SIM CHIP in the marked slot. The SIM chip was very easy to align and insert. I had no issues and it works perfectly. I also changed the setting to wide.

After reading their instructions, I was concerned about finding the slot and inserting the SIM chip. However, when I removed the cover, finding the slot was obvious and I had no issues. The location of where the chip needs to be inserted is clearly marked. YES, you have to be CAREFUL inserting the SIM Chip and I used a flashlight to help me.

Once you power up the DAC, please WATCH the screen for a progress report (it goes fast) and the words PROG OK. Any questions, please ask. cheers.