Right @audiophilejunkey, the LFT-18LS. That was mentioned back on page 1 of this thread, where the same video (which you filmed ;-) is posted as well. But thanks! I followed your build of the NX-Treme on YouTube, which is one reason why I didn't build a pair myself ;-) . Building the OB/Dipole Sub was pretty easy, but the EX-Treme looks to be quite a bit more daunting. Plus, I really like the ET LFT-8b!
Steve Guttenberg finally reviews the Eminent Technology LFT-8b loudspeaker.
Over the past few years I and a number of other owners of the Eminent Technology LFT-8b have on this site extolled the virtues of this under-acknowledged loudspeaker. I myself have encouraged those interested in Magnepans to try and hear the LFT-8 before buying. That is not easy, as ET has only five U.S.A. dealers.
I am a long-time fan of Maggies, having bought my first pair (Tympani T-I) in 1973, my last (Tympani T-IVa) a few years ago. But the Tympani’s need a LOT of room (each 3-panel speaker is slightly over 4’ wide!), which I currently don’t have. So I gave a listen to the MG 1.7i, and didn’t much care for it. As I recounted in a thread here awhile back, I found the 1.7 to sound rather "wispy", lacking in body and tonal density (thank you Art Dudley ;-).
Brooks Berdan was (RIP) a longtime ET dealer, installing a lot the company’s linear-tracking air-bearing arm on Oracle, VPI, and SOTA tables. After Brooks’ passing his wife Sheila took over management of the shop, continuing on as an ET dealer. I knew Brooks was a fan of the LFT-8, and he had very high standards in loudspeakers (his main lines were Vandersteen, Wilson, and Quad). The shop had a used pair of LFT-8’s, so I gave them a listen. They sounded good enough to me to warrant investigate further, so I had Sheila order me a pair, along with the optional (though nearly mandatory) Sound Anchor bases.
I wouldn’t waste your time if I didn’t consider the ET LFT-8b to be just as I have on numerous occasions (too many times for some here) described it: the current best value in all of hi-fi. Hyperbole? Well, you no longer have to take it from just me and the other owners here: Steve Guttenberg finally got around to getting in for review a pair (the LFT-8 has been in production for 33 years!), and here is what he has to say about it. After watching the video, you can read other reviews (in a number of UK mags, and in TAS by Robert E. Greene) on the ET website.
- ...
- 166 posts total
@bdp24 Grant quoted CAD$ 900 for the Mye stands. I initially thought they were quite steep for two structs. Now I understand that it is the entire stand + struct combo. Someone on Audiogon posted the use of Townshend Pods in lieu of the SA spikes to very good results. With both Towshend Pods and the Mye stand, that would take the LFT 8s' into another level. The only thing i don't like about the Pods is that they raise the speaker several inches. And the alignment of the tweeter and my listening height is rather critical. If a bit off axis, details suffer. |
@bdp24: So that we are being clear, the LFT8b/c do not have a wood frame. The frame is entirely welded steel. There are narrow strips of wood that screw onto the steel frame, but they add no structural rigidity - that’s all up to the steel frame. The wood is there for appearance (and I wish they were a bit nicer, to be honest). I can push against our frames (panels) and they flex a little due to the leverage, but there is no such pressure against them at any other time. An earthquake bad enough to cause the panels to bend would bring down the house, so not really sure there would be an advantage to added rigidity. I can MIG, TIG or gas weld my own stands and modifications, but saw no reason to do so. I considered it when I was replacing the panel with the buzzing midrange ribbon with the entire new panel sent by Bruce, but my real interest in future mods was to install threaded inserts into the wood woofer box for the steel panel frame to screw into more securely. |
Damn, you’re right @gktaudio! I have both the LFT-4 and LFT-8b in my room, and use the latter with it’s grill cloth frames in place. The LFT-4 didn’t come with (a) grill frame(s), and it is the LFT-4 which has the LFT driver assembly (containing bass, midrange, and tweeter sections) attached to a solid oak frame. No wonder the LFT-8b is so heavy! Actually, so is the LFT-4. I thought the weight was a result of all those bar magnets ;-) . @ledoux1238: Yeah, the listeners ears really have to be within the height of the tweeter, that’s how a line-source tweeter behaves. The original version of the LFT-8 had the tweeter strip at the top of the panel rather in the middle, and people were complaining that the high end dropped off when they sat down. In the a or b revision Bruce lowered the tweeter to it’s present location. But there is a solution to the tweeter being too high with the Townshend Pods in place: put shims under the Pod(s) at the rear of the 8b, which will then point the tweeter down towards your ears. Little blocks of something stiff will do, like birch plywood (painted black). Adjust the height of the rear of the LFT-8 until you get the center of the tweeter to be aimed at the height of your ears. That's how the tweeter pods in the big Wilson speakers are aligned. |
- 166 posts total