Bruce had a prototype new reference in Tampa at the Show back in February. Plus, don't forget about his propeller sub and guitar speaker...This video shows a bit of those aspects from the Florida International Audio Expo
https://youtu.be/91ybrCypcKk
Steve Guttenberg finally reviews the Eminent Technology LFT-8b loudspeaker.
Over the past few years I and a number of other owners of the Eminent Technology LFT-8b have on this site extolled the virtues of this under-acknowledged loudspeaker. I myself have encouraged those interested in Magnepans to try and hear the LFT-8 before buying. That is not easy, as ET has only five U.S.A. dealers.
I am a long-time fan of Maggies, having bought my first pair (Tympani T-I) in 1973, my last (Tympani T-IVa) a few years ago. But the Tympani’s need a LOT of room (each 3-panel speaker is slightly over 4’ wide!), which I currently don’t have. So I gave a listen to the MG 1.7i, and didn’t much care for it. As I recounted in a thread here awhile back, I found the 1.7 to sound rather "wispy", lacking in body and tonal density (thank you Art Dudley ;-).
Brooks Berdan was (RIP) a longtime ET dealer, installing a lot the company’s linear-tracking air-bearing arm on Oracle, VPI, and SOTA tables. After Brooks’ passing his wife Sheila took over management of the shop, continuing on as an ET dealer. I knew Brooks was a fan of the LFT-8, and he had very high standards in loudspeakers (his main lines were Vandersteen, Wilson, and Quad). The shop had a used pair of LFT-8’s, so I gave them a listen. They sounded good enough to me to warrant investigate further, so I had Sheila order me a pair, along with the optional (though nearly mandatory) Sound Anchor bases.
I wouldn’t waste your time if I didn’t consider the ET LFT-8b to be just as I have on numerous occasions (too many times for some here) described it: the current best value in all of hi-fi. Hyperbole? Well, you no longer have to take it from just me and the other owners here: Steve Guttenberg finally got around to getting in for review a pair (the LFT-8 has been in production for 33 years!), and here is what he has to say about it. After watching the video, you can read other reviews (in a number of UK mags, and in TAS by Robert E. Greene) on the ET website.
- ...
- 164 posts total
Right @audiophilejunkey, the LFT-18LS. That was mentioned back on page 1 of this thread, where the same video (which you filmed ;-) is posted as well. But thanks! I followed your build of the NX-Treme on YouTube, which is one reason why I didn't build a pair myself ;-) . Building the OB/Dipole Sub was pretty easy, but the EX-Treme looks to be quite a bit more daunting. Plus, I really like the ET LFT-8b! |
@bdp24 Grant quoted CAD$ 900 for the Mye stands. I initially thought they were quite steep for two structs. Now I understand that it is the entire stand + struct combo. Someone on Audiogon posted the use of Townshend Pods in lieu of the SA spikes to very good results. With both Towshend Pods and the Mye stand, that would take the LFT 8s' into another level. The only thing i don't like about the Pods is that they raise the speaker several inches. And the alignment of the tweeter and my listening height is rather critical. If a bit off axis, details suffer. |
@bdp24: So that we are being clear, the LFT8b/c do not have a wood frame. The frame is entirely welded steel. There are narrow strips of wood that screw onto the steel frame, but they add no structural rigidity - that’s all up to the steel frame. The wood is there for appearance (and I wish they were a bit nicer, to be honest). I can push against our frames (panels) and they flex a little due to the leverage, but there is no such pressure against them at any other time. An earthquake bad enough to cause the panels to bend would bring down the house, so not really sure there would be an advantage to added rigidity. I can MIG, TIG or gas weld my own stands and modifications, but saw no reason to do so. I considered it when I was replacing the panel with the buzzing midrange ribbon with the entire new panel sent by Bruce, but my real interest in future mods was to install threaded inserts into the wood woofer box for the steel panel frame to screw into more securely. |
- 164 posts total