2. cables
  3. 186071-2603

Re-wiring the listening room: Questions

FINALLY getting around to having some straight runs from the panel to the listening room.

My room is a basic rectangle with the speakers at 10:00 and 2:00, amps at 12:00, and equipment at 9:00.

Currently everything is fed via power near the equipment, also at 9:00, however I do have another outlet at 12:00.

Should I do two separate runs?

If so, do I want both individual runs available at the 9:00 and 12:00 positions?

Currently everything is plugged into an AQ Niagara, I have all digital and analog stuff powered via that same Niagara, however I could foresee adding a second power conditioner/distributor in the future to just serve the amps located at 12:00.

What should I do?

Thank you!

gthirteen
ghdprentice
7,294 posts
 

@lak 

+1

 

Yes, you want a direct line at 12 for the amp(s)… and at least one for the rest at 9. Two at 9 will certainly not hurt. The incremental cost should be very small  for the third.

gthirteen OP
355 posts
 

Cool, and great suggestion guys.

 

For the 9:00 position, do I put two outlets there, so a total of 4 receptacles?

lak's avatar
Ag insider logo xs@2x
lak
4,682 posts
 

@gthirteen Yes

soix
9,796 posts
 

Some thoughts/feedback I got from when I ran my dedicated lines…

  • If you can, run at least three dedicated lines — one for digital, one for analog, and one for your amps (that you may prefer to run straight from the wall) as it’s not terribly expensive to add another line.  Separating digital and analog might not be as important depending on how your Niagara is designed.
  • Run 20-amp lines with at least 12/2 romex.
  • Run all lines off the same leg, and don’t share the lines with other household equipment.
  • Get some good outlets.  I’d recommend CruzeFirst Maestro outlets for both performance and value…https://www.cruzefirstaudio.com/maestro

Hope this helps, and best of luck. 

gregdude
222 posts
 

All the above advice sounds like a ground loop just waiting to happen. 

More to discover