Denafrips FPGA Firmware Update

All I can say is prior to 3.5 update my Venus II was 000111 I2s setting. After the update it remained 000111 and I use a Tublus Argentus I2s cable. I have no preamp right now so I cannot listen but it registers as receiving the correct signal. (44.1 -1x)

The joys of digital audio! Turned everything off physically and powered everything back on starting with source and ending with DAC, to that point i had concentrated on rebooting DDC, SOTM NAA bridge and DAC not considering anything else in the chain. I have used the system all weekend without an issue. Why the Antiopodes source would be affected by changing I2S pin out on the DAC i dont know. Maybe something completely unrelated that coincided with changeing I2S. Keeping fingers crossed.

In terms of sound, Firmware update very positive in all areas but still lacking body in mids.  With all the issues i have had i havent really been able to let the system settle.  Intend to keep 3.5 on the Venus due to improvements in clarity, focus and scale/depth and hoping mids fleash out over time.

I just updated the firmware for my TII.  I am very pleased. There was an immediate improvement in the SQ.  I recommend doing the upgrade.  It was a challenge to get it done.  However, it has been worth the frustration. For you, computer whiz, I am sure it was a piece cake.

A quick update on the I2S connection issue for Iris DDC and T-plus running V3.7. Denefrips said they would no longer work on a firmware fix for the old (my bought in Oct 2021) DDC since it is replaced by the new 12th Ed. I bought a new Iris DDC 12th, installed it last night and tested for both PCM and DSD playback. It is now working perfectly via I2S connection to T-Plus running V3.7. The pinout configuration remains as 000, I did have to switch DSD right/left channel set up. Very happy with the sound so far, better than USB direct connection and also better than the old DDC I2S -> T-Plus running V1.0.. Will evaluate more after a few days.

@liangx5  Glad to hear you ended up better than you started with the new firmware and Iris 12th with I2S.

I sold my TP and Iris due to the conflict between the two and because I had purchased another DAC.  I recently purchased another DDC and am using SPDIF on BNC connectors.  The BNC connection sounds fundamentally different than the USB from the TP or my new DAC and also similarly different from the I2S sound.

I wish I had tried the SPDIF before selling the Iris now.  It took a few weeks for the BNC to settle to its best but I knew right away I preferred it to USB.  The only downside is no DSD and max rate is 192.

I don't understand the differences between synchronous and asynchronous but I am now a believer that converting USB or Ethernet with a DDC is beneficial.

​​​​​​