MM Phono Stages With Greater Than 40 dB of Gain?

mulveling: The Herron VTPH-1mm produces 44dB of gain when fitted with four 12AX7’s (plus one 12AT7 for non-gain functions), and 42dB with two 12AT7’s substituted for two of the 12AX7’s. The 12AX7’s and 12AT7’s are user interchangeable; Keith sent me enough of each to configure it either way.

A VTPH-1mm sold this past July on USAM for $500! The seller said the unit was a pre-production sample, hence the low price.

The VTPH-2 (in three iterations I believe) I’m not sure about. The bulk of the improvements incorporated into the VTPH-2 over the VTPH-1 were in it’s mc section, which was (and is) of no consequence to me, so the VTPH-1mm met (and meets) my needs.

Moon 110LPv2

Up to 66db gain both mc and mm. I have the same circuit in a Moon 390 and I like it. Worth a look.
 

In my direct experience, you want at least 80db of total voltage gain (phono + linestage) to get the most out of an MC2000.  More is even better.

@lewm

Sounds reasonable. Tracks with I would expect for total gain needed on the phono stage combo to allow the cartridge to be at its best. With the T2000 supplying 35dB then I need 45 to 50 dB from the phono stage. 

Cornet MM has a fixed gain of 44dB. You can't change it, as both passive EQ and gain are tied to 12AX7 parameters. It is what it is. 

https://www.haglabs.com/collections/phono-preamps/products/cornet-mm-vacuum-tube-phono-preamp

If you need 64dB gain at 47k loading, Bugle MC? Trumpet MC can do 74dB at 47k load...