Alpha Core Goertz

The issue here is that the Goertz cables have high capacitance. If connected to an amplifier with a poorly designed feedback loop, the result can be an oscillation that can damage the amp (and probably a tweeter) in very short order. This was a much bigger problem in the 1970s and early 80s. But just because an amp was made in the 21st century does not guarantee its immunity; its best to check with the amp manufacturer to be sure there isn't a problem. The ZOBEL network may or may not help (but won't harm) depending on the amplifier's design.

Thank you for the help.

I just received the Zobel’s and I must say I am way underwhelmed. They look like 2 toothpicks! I wonder how long the little thin bare wire will last?

I put them in some stackable spades, hopefully, to minimize wear.

The actual used Goertz cables are to arrive tomorrow.

ozzy

I just received the Goertz Ml 3 Divinity cables. I connected it up with the Zobel’s and then without. They are installed only the bass side of a bi-wire speaker connection.

With the Zobel’s the bass seemed not quite as articulate, and the midrange seemed more pronounced. When I removed the Zobel’s just the opposite occurred.

Thus far the amps (Michi 8) do not seem to be having any issues sans the Zobel’s.

Is it possible the Goertz cables already have the Zobel’s installed internally, and I just may be adding a second set? If so, is it something I could visibly tell? There may be a bump underneath the jacketing, it is very hard to tell. The Zobel’s that I purchased separately are very miniscule.

I have emailed the seller and am waiting his reply.

Can someone with these cables chime in?

ozzy

Is it possible the Goertz cables already have the Zobel’s installed internally, and I just may be adding a second set?

No. But its very possible that a ZOBEL network is inside your amp!

Really? I never thought of that.

ozzy