@munden Another positive for the Third Party Cartridge Service, especially a Service that has a time served technician at the helm.
It looks like a few new albums are on the radar with all your saved monies burning hole in your pocket 😎.
Andy Kim - Needle Clinic
I wanted to put this post out there about Andy Kim of Needle Clinic, located in Bellevue, Washington. As many may know, Andy is a cartridge re-tipper. I tried to find some older posts to add my comments but couldn't find them. So I'll start another OP. I just got my Lyra Kleos back from Andy today. Here's my comments.
My Kleos sounded a little off lately, so I thought it should be checked out. I sent it to Andy Kim. It turns out all that was needed was the stylus required a cleaning and polishing. Andy reported back that the stylus only has about 10 percent wear; IOW plenty of life left.
So I remounted the Kleos today and have been playing all types of music: rock and roll, classical, and so forth. The Kleos sounds wonderful; just great. Kudos to Andy Kim.
Fyi -- some may ask why I didn't send it to Peter Ledermann at Sound-Smith. I seem to recall reading somewhere that he's been unusually busy lately -- and with good reason -- and turn around might be a bit delayed. Also, I'm not sure Peter uses replacement cantilever/stylus assemblies that match (or at least come close to) the original. Andy does.
Anyway, that is a bridge I don't have to cross today.
Bottom line: Andy turned my cartridge within a week of receipt and I am pleased.
My Kleos sounded a little off lately, so I thought it should be checked out. I sent it to Andy Kim. It turns out all that was needed was the stylus required a cleaning and polishing. Andy reported back that the stylus only has about 10 percent wear; IOW plenty of life left.
So I remounted the Kleos today and have been playing all types of music: rock and roll, classical, and so forth. The Kleos sounds wonderful; just great. Kudos to Andy Kim.
Fyi -- some may ask why I didn't send it to Peter Ledermann at Sound-Smith. I seem to recall reading somewhere that he's been unusually busy lately -- and with good reason -- and turn around might be a bit delayed. Also, I'm not sure Peter uses replacement cantilever/stylus assemblies that match (or at least come close to) the original. Andy does.
Anyway, that is a bridge I don't have to cross today.
Bottom line: Andy turned my cartridge within a week of receipt and I am pleased.
- ...
- 117 posts total
| Post removed |
@lardawg I always feel the need to chi in. I have used Cart' rebuild Services, and gave the utmost praise for the Skills of the Technicians at their helm. My own and others I know who are using this method, has as a result, created genuine advocates of the practice. To hear the Cart' had a unknown of fault and the assessment offered following Andy's work is one more story to encourage others to make a Contact with a Third Party Service. |
| Post removed |
I used Andy @Needle Clinic to repair a damaged my damaged Sumiko blue point special EVO3 with a broken cantilever. He answered my e-mails in less than 30 mins. and there were many (lol) & was very helpful in deciding my best path to repair. I went with a boron cantilever & hyper-elliptical stylus he also rebuilt my suspension which was damaged unbeknownst to me.. Andy’s turnaround time was 2 days from receipt of my cartridge to back in the mail to me. His quality of workmanship looks impeccable under my microscope & my EVO 3 sounds better than when it was new (and it sounded fantastic to me new). I would highly recommend Andy to anyone looking to retip their cartridge |
- 117 posts total