Cable Break In for the Naysayers


I still cannot believe that in this stage of Audio history there are still many who claim cable break in is imagined. They even go so far as claim it is our ears that break in to the new sound. Providing many studies in the way of scientific testing. Sigh...

I noticed such a recent discussion on the What’s Best Forum. So here is my response.

______________________________________________________________________________________________ I just experienced cable break in again firsthand. 10 Days ago, I bought a new set of the AudioQuest Thunderbird XLR 2M interconnects.

First impression, they sounded good, but then after about 30 hours of usage the music started sounding very closed in and with limited high frequencies. This continued until about 130 hours of music play time.

Then at this time, the cables started to open up and began to sound better and better each passing hour. I knew at the beginning they would come around because they sounded ok at first until the break in process started. But now they have way surpassed that original sound.

Now the soundstage has become huge with fantastic frequency extensions. Very pleased with the results. Scientifically I guess we can’t prove cable break in is real, but with good equipment, good ears, it is clearly a real event.

ozzy

128x128ozzy

My joking aside, I think an important contention is that despite many manufacturers / engineers in other lines of products conducting [robustly designed] consumer preference analyses for a variety of reasons, for whatever reason these seem utterly absent from cable companies. Preference studies can be mildly painstaking and usually not free. In this case it’s almost like something that’s not been demonstrated is better staying that way; why?

Just curious to me. No bother any which way.

For those that don’t believe let them live in their own world.

fact the metal has to season in as well as the connectors as dielectric 

Teflon takes the longest , I deal with upgrading Loudspeaker capacitors Xovers frequently and 100% just like with a cable I give them minimum of 200 hours to 

fully settle in . If they don’t believe ,not worth your time debating .

just like with new electronics .

I have tried several sets of speaker cables in my system, and with few exceptions, they all sound different after some usage. My expectation bias always leans towards revelatory, and my hopes are generally dashed out of the gate and I must wait for them to settle to hear their true character. 

     Back in March 2022: a thread about power cords and break/burn-in was started.

     I hate to type, so: I'm going to copy/paste some of my speculations.

     That a highly complex musical signal, MIGHT affect Poynting vectors and signal speeds*, in interconnects, in a much more profound manner than a simple AC (ie: a fixed 60/50 Hz) signal, in a PC, seems likely (at least) to me, as; in EVERY formula regarding *those two, a signal's frequency (frequencies) always factors in greatly.

     Further: the above and what I'll c/p (seems to me) lends credence to how the application of a stronger, DC voltage/field, outside a dielectric (ala Synergistic MPC and Audioquest DBS systems), might stabilize those vectors and signal speeds, PERHAPS eliminating some time smear and, "burn-in". 

rodman99999

5,456 posts

03-31-2022 at 12:13am 

 

@holmz-

      Bear with me a minute, in my folly, far as a possibility on why a power cord might make a difference.

      Based on some of the theories on how electricity works, simplified:

      The conductor acts as a waveguide for the signal/voltage.

      Within the conductor: when excited by an AC current, electrons oscillate, generating photons/electromagnetic waves that travel, always from the source, to the load.

       Keep in mind: all signals (ie: music, AC) are sinusoidal  waves

       Those photons/electromagnetic waves travel through and outside the dielectric, which (according to it's permittivity/Poynting vectors) will have various effects on those waves.    One of the most obvious is the dielectric's effect on the speed of the signal.

      The better designers of printed circuit boards, even take the above into account, when choosing materials for their products.

       I posted a link on the first page that included data on the manufacture of semiconductor chips and what was observed when materials were cryo'd, during the process.     Short version: better contact/lowered resistance between layers.

          Under the scanning microscope: much smoother surfaces observed.

       I would hope, by now, it's a given that various cable constructions, twists, braids, etc, can make for a cleaner transmission of signals (ie: Litz, etc).            

        Just seems to me (a hypothesis): given the above (some theories and some things established/measured/proven), it's not a big stretch to believe a power cord, built of the best conductor (ie: Ohno CC silver), wrapped in a very low dielectric coefficient dielectric (ie: Teflon), cryo'd for the smoothest transfer of those photons/magnetic waves and twisted in some crazy way, might not smooth out some of perturbations/noise, from the crap an AC waveform had to go through, back to it's generator.  (run-on, much?)

       I haven't tested this, actually comparing two circuits, but: it wouldn't surprise me, if a power supply that used a choke, would be less affected by a better power cord, as the former can eliminate a lot of the high freq garbage, etc, that's either created by, or makes it through all the big converting/filtering stuff, before.

       Never thought about PCs before the good stuff hit the market, but: the Physics/QED made sense.

            I tried 'em, I like 'em and the science makes my head feel better.

                              Don't care WHAT it does to anyone else's!

 

rodman99999

5,456 posts

03-31-2022 at 12:27am 

 

     OH, and: it takes some time for the dielectric to form, take a charge, polarize, or however one chooses to define the process, when a dielectric is subjected to electromagnetic waves, which affects the Poynting vectors, measurably/predictably.

                              The lower the material’s dielectric constant: the longer that takes.

                                         PC (interconnect/etc)  burn-in?    Maybe?

                                                          Happy listening!