Yes, cables do make a difference -- regardless of price...


I thought you may find this interesting…or not.  I know, another "cable post".  Disclaimer up front — I am a believer that cables can make a difference in the sound that you hear from your system.  With my speakers, like most high(er) efficiency speakers, I can hear large and small changes made to the system components — and cables are part of that system.

What I want to share is an exercise that I went through with my better half in setting up her recording equipment that she will be using to record audio books.  The hardware part of the system is simple:  Audio Technica Cardioid Condenser Microphone AT2035 connected with a XLR cable to the Focusrite Scarlett 2i2 preamp.

We started with the XLR cable that came with the microphone and recorded the short introduction of the book she has been contracted to record.  Then she recorded the same section using each of the our XLR cables I have on hand:  Vovox Excelsus, Mogami 2549, Gotham GAC-3, and Grimm TPR. Each of the cables have the same Neutrik connector and are very good studio cables that I have used in my system at one time.

Listening through headphones via the Scarlett 2i2, it was super easy to hear distinct differences in these cables.  The differences were not small and very apparent.  In the end, the Mogami cable was the winner — it seemed more open and warmer than the other cables and suited the tone of her voice the best. I have heard similar differences from these cables in my stereo system but not to the significant degree borne out by this exercise. 

To keep going, today I replaced the $10 USB C to C cable that I bought as an “upgrade” from the Scarlett 2i2 to a MacBook Air with a $70 Audioquest Forest cable. We were more than surprised that with the AQ cable in the system the drop of the noise floor was very significant and the blackness of background made the sound even more crystal clear.

The purpose of this post is not to promote or compares cables, just a public service posting for those of you who do not believe cables make a difference.  They really do affect how your system sounds (positive or negative) and if you cannot hear a difference then maybe looking at the transparency of your system is a place you should examine.

Imagine peace everyone.

crozbo

@donavabdear

Watch it one might think you a flat earther !  Perhaps more learning time to hear is needed, you know rule out the A / B, placebo, or 50-50 results. In the future you will probably see some Yum Yum selling cables with very small ‘audio’ only capacitors installed in their cables. Damn there’s that alternating current problem again…

Cheers

crozbo, this is not a PSA.

You chose to sacrifice your annual post on the cable altar and start yet another entirely predictable, contentious and worthless argument. 

 

  

Cables certainly make a difference. If you're not hearing it, then it is one (or more) of the following issues: 1) Your hearing is just not good enough; 2) Your system does not have the resolution to allow you to hear the difference; 3) Your listening to an unfamiliar system; 4) Your cognitive bias says you cannot hear a difference between cables.

As far as A/B testing, No.3 is often the culprit in not allowing differences to be heard. The differences between cables are often very subtle and it takes a while for the listener to adjust to hearing the intricacies of a new system. 

I'm also of the opinion that cost of the cable has very little effect on the final sound, however, I do always feel partial to a silver-coated copper conductor.

Also, here's a 5th issue: different components change cables difference as well. I'm not talking resolution, but the interplay between source/preamp/amp/speakers. The interaction between impedance, sensitivity, etc. also play a role.

                                                  A years old rewind:
 

        Anyone needing a rationale for experimenting with new cables in their system and/or feeling dissuaded by the Church of Denyin'tology's antiquated electrical doctrines: take heart!

        Many new electrical facts have been established in the past 100 years, that support audible differences, between various cables, fuses, etc.

         I couldn't find anything like, "Updated Electrical Theory For Idiots", but- did manage to find something resembling a cartoon, that even a child could follow.  It neither mentions AC/sinusoidal waves in wires, nor does it go into the photon propagation of electromagnetic waves.   It does, however, emphasize/demonstrate how Electrical Theory has progressed, since the 1800s:

              (https://www.youtube.com/watch?v=KGJqykotjog)

        These next two presuppose a certain amount of knowledge, in the field of modern Electrical Theory.    Click, "continue reading" in the first link's first answer, to get its entirety.    Note how it mentions the OLD, "... commonly held misconception that the flow of electricity through a wire resembles a tube filled with ping pong balls...", to which the Denyin'tologists fervently adhere: 

https://www.quora.com/Are-photons-involved-in-all-forms-of-electricity-for-example-when-it-flows-through-wires?utm_medium=organic&utm_source=google_rich_qa&utm_campaign=google_rich_qa

                                            and:

        https://van.physics.illinois.edu/qa/listing.php?id=2348

        It's an established (measured) fact that an electromagnetic wave's propagation and speed, are dependent on the materials, of which the transmission line (cable) are made (ie: Dielectric Constant/permittivity).     The better (lower) the Dielectric Constant the better the flow and the longer it takes for that material, to become polarized.     One reason anything that comprises an RLC circuit (ie: capacitors, cables, PC boards), takes time to, "form", or, "break/burn-in".*      

          *Something that makes the Denyin'tologists apoplectic.

   https://resources.pcb.cadence.com/blog/2019-dielectric-constant-of-pcb-substrate-materials-and-signa....

https://unlcms.unl.edu/cas/physics/tsymbal/teaching/EM-914/section5-Guided_Waves.pdf

          Even the most inane (regarding the Sciences) must admit; braiding and twisting wires eliminates/reduces EMI interference.              
          That must lend credence to various cable geometries.

          That better dielectrics enhance the propagation of electromagnetic waves (ie: your music signal), lends the same credence to choosing cables with better materials (ie: Polypropylene, Teflon, air, etc).

           Of course: anything the Church of Denyin'tology's popes can't fathom, they'll summarily dismiss.

     

         As simple a device as a fuse is: it still carries a sinusoidal signal/voltage, ALWAYS from source to load.

                                                 NOT back and forth!

         Also (as mentioned above): any fuse acts as an RLC circuit, the 'C' of which will be determined by properties of its wave guide's/ conductor's surroundings (ie: glass, air, bee's wax, ceramic, end cap materials, etc).

          Any commonly drawn wire will exhibit a chevron pattern in its crystal lattice, so: why not "directionality" and why OHNO Continuous Cast, single crystal wire sounds better, to so many?

 

                   Stated above are scientifically tested, measured and proven facts. 

                                  There is no "contest", or "dispute" involved.

 

         The OP mentions Maxwell, but: obviously they have no understanding of his theory and possible ramifications as regards the above.

  

          Anyone that feels compelled to harp on not hearing any differences, is obviously too obtuse to understand the term "variables" (as frequently mentioned) and worthy of disregard.

  

          My only goal in these threads has ever been to encourage those with a curious, rational, functioning mind to experiment with their systems, based on the latest (20th/21st Century's) findings of ACTUAL Physics/science and ignore the Cargo Cult's incessant runway building (objections, convolutions, deflections and obfuscations).

 

                                           Happy listening!