TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ?

https://www.sereneaudio.com/blog/what-does-jitter-sound-like

Dear @mijostyn  : With all respect to you what in " hell " you did not undersand from my last post that are not my words but the gentlemans/researcher Crandfield Institute where them belongs to the Departament of Design of Machine systems.

Townshend was not one of those researchers he was the investment gentleman that decided to run out with what those gentlemans discover and proved.

I said all that because you insist: " there are tonearm cartridge combinations that will benefit from damping.........there is more to resonance that just frequency....there is also sensitivity, amplitud and duration ."

Btw, in those white papers all those about amplitude and the like comes with not wide explanation but measurements about.

Anyway , my main issue is not about the tonearm/cartridge resonance but the characteristics that surround the cartrdge riding the groover. This is what is happening down there and what is eveloping by the cartridge it self ( forgeret about the tonearm even if is a " perfect " tonearm and good mated to the cartridge. ).

Please think in the cartridge ridding grooves in isolation that it's something that those researchers concluded along other conclusions:

I have several years posting about that analog jitter/mistracking way before I started this thread or that P.Lenderman video and way before I knew about the white papers I mentioned here.

Those white papers are around 250 pages, it’s truly bigger to read it but yesterday for the first time I read there:

" this is atributed to cartridge vibration at high frequency upseting the subtle phase effects...."

" The name clamp or stabilizer seems more appropiate than damper, as the device only damps over a very narrow frequency range: 8hz-15hz but clamps from 20hz to 50khz. It is the clamping which gives the improvements:

a) bass coloration reduced

b) mid band "openess" improves

c)distortions at all frequencies is reduced

d)stereo imagery improved

e) tracking problems " eliminated " and

f) feedback greatly reduced. "

Clamp down there is the name of the game and the silicon is what it does " clamps " the cartridge to the groove surface in a % that in many ways stop that the cartridge ridding follows developing higher distortions. NO it does not really clamps it's only a little help that even a deaf audiophile can listen if it's using the rigth silicon viscosity and the good news in this clamp is that we achieve only benefits and nothing " wrong " that you can detect and only testing you can attest about in positive or negative way. I repeat: you have to test it with several cartridges in your system.

I already posted that I builded trays for the silicon dedicated in specific to around 8 different arms where I tested the same cartridges using the same LP tracks and with different silicon viscocities.

I know what I'm talking about and you DON'T only theory and good imagination/desires and the like. You need facts or to make your own measures with and with out the silicon tray in you tonearm ( I know that you think that your tonearm does not needs that damping but it's not for the tonearm but for the cartridge ridding. )

R.

@rauliruegas I don't have time to read 250 pages. I've got to finish my wife's vanity. Look, what's happening down there is rather simple. There is a diamond stylus tracing  groove at something like 60,000 psi. while the cartridge and everything else it is attached to including Mexico must remain absolutely, perfectly, unassailably stationary other than the slow movement of the arm traveling to the end of the record. There can be no vibration of any kind other than the moving assembly of the cartridge (diamond, cantilever, coils or magnet) 

Now, someone must have a problem somewhere along the line as they want to apply damping. Damping is a method for controlling vibration. It serves no other purpose. Applied to a tonearm it's job is to stop the tonearm from moving or vibrating, if you will, and if there is a vibration that is not supposed to be there, the damping might diminish it some. If the cartridge is vibrating, then so isn't the tonearm. The opposite is also true or there is another vibration and you are in serious trouble. You might as well hang it all up and get a Corona.

@mijostyn : You need to go out for a few minutes from your little world.

Btw, the key in this cartridge main issue is the choice and quantity of silicon viscosity level we are using it.

R.

@rauliruegas I'm sure viscosity is a factor if you have that problem, another factor to drive yourself crazy about.

I really like my little world. I can hide from the rest of humanity with a few selected exceptions. I hate to say this Raul, but you have to assume at this point that until human's can control their primitive instincts we are better off staying away from them. Not that there are not good people out there, there are , but their silence is deafening.