if you had this system, what would you do to make it sound the best you can

Here are some easy things

Walk around the room.  Listen for certain frequencies changing volumes.  If you hear nulls or peaks, sound treatment.

If your system has been as is for a while, take all the interconnects and speaker wire apart and clean with DeOxit or Stabillant 22.

Isolate speakers from floor.  I used springs but my speakers have a big footprint.

Any old equipment in 20 to 30 yr range should be checked.

Those are low cost.  Another quick one is the ADD POWR company.  Most expensive one is $4000.  It will just open up the music, make it clearer and has a 30 day audition.. Turn it on and play music.  In 20 minutes, you will hear what it does.  Turn it off to double check.  Turn it back on, etc.  Have fun.

Thank you all for your suggestions and comments.  That helps me make some decisions on how to improve the system.

the system electronics are in a closet system designed for the pieces I have.

the room is challenging as it is 12x18, open with 24 foot at peak vaulted ceilings. I will checkout the suggestions and make changes.

@markley - start with cables. Once you have them n place it’s easier to discern improvements when changing components and speakers.

A very good brand is Audio Envy - great cables at affordable prices.

Next step up from there would be Zavfino

Here’s my thread as to why cables make such a huge difference

• What Makes a good cable

I’ve made cables for around 15 years and had great success on rigs of varying prices, from $350 to $70k

Your system can sound much better with the right cables

Once he cables are in place I would then repalce the speakers - Tannoy make some excellent speakes for an afordable price - but there are so many good brands to choose from

Good Luck with your quest - Steve