In my case, similar to yours, it turned out to be the XLR cable itself
Can a poorly connected XLR connection cause a reduced(less loud) signal?
Been chasing a gremlin. I have an XLR balanced connection between a ROSE HIFI 150b DAC/streamer and an Accuphase E-380 Integrated Amp.
I have noticed the left channel to be a bit quieter, less bright, and measuring a bit lower on the Accuphase’s DB meters. The problem has been intermittent. I feel like I may have solved it, albeit temporarily, by pushing the XLR farther into the connector on the ROSE HIFI. I had read on their forum site that those connectors could be problematic.
But the basis of my question is: Can a poor XLR/balanced connection result in a lower/softer sound?
I have experimented with switching the cable, and even bought a different cable, don’t believe it to be a cable issue.
Edit: yes, I know my post title is a grammatical nightmare.
- ...
- 10 posts total
Thanks for all the responses. I have tried multiple new cables, but have also ordered a cable tester, and tomorrow will be able to know for sure about cable. I have seen other posts on the ROSE HIFI forum that these connectors could be problematic. I have entered a support ticket on that forum. Will let you know what I hear.
@elliottbnewcombjr was your issue on Rose HiFi gear, or something else? |
Thanks @elliottbnewcombjr Yes, I have switched back to RCA, and things work as designed. It’s an “OK” solution, as I purchased and paid extra for, these two pieces so that I could connect them in balanced fashion. I’ve reached out to ROSE HIFI support, as the problem does appear to be on their end. Rather it be their electronics or connector. |
- 10 posts total