2. analog
  3. 190066-189300

Changing from European to American power supply on clearaudio emotion TT

Recently I purchased a clearaudio emotion TT on eBay from a European seller for what I thought was a great price. However, upon arrival I realized that it's motor is rigged for European voltage and not compatible with American voltage. NChanging a power chord did not fix the issue as the platter spins at somewhere near 40 rpm which leaves records sounding like the chipmunks. Is it possible to change the motor? Is there anyone familiar with clearaudio products that could let me know what solutions are available? eBay issued a no fault refund to both me and the seller so I essentially got the TT for free but I would really love to get it up and running as it would be a massive upgrade for me.

Cheers and thanks for reading,

Shane

oldshanelistens
knock1
237 posts
 

You probably need a transformer to supply 240V tor the table (european voltage), however the AC frequency in Europe is 50Hz vs. US 60Hz and this might be a problem.

BTW, you did not know about difference in AC power in US and Europe?

It seems that  you are happy about having it for nothing. Wow! Nice moral compass.

Ag insider logo xs@2x
cleeds
5,957 posts
 

knock1

... the AC frequency in Europe is 50Hz vs. US 60Hz and this might be a problem ...

It looks like the Clearaudio uses a synchronous motor so that's going to be an issue unless perhaps he can change the motor pulley.

tony1954's avatar
tony1954
1,051 posts
 

There are voltage conversion systems available that will convert 110V to 220v but they require your plugging into two separate outlets that are out of phase to each other.

This could be very awkward because the required out of phase outlet might be quite a distance away.

 

carlsbad2's avatar
carlsbad2
1,623 posts
 

Transformers don't change frequency.  The best suggestion you've been offered is to change pully's.  that requires that either you can calculate the right pully size and bets or the OEM has done it for you.  A bit tricky as the effective diameter of the pully is its rolling diameter that might be slightly different than it's measured diameter.  good luck.

Jerry

Post removed 
More to discover