Pass XP-17 and Hana ML loading question


Guys anyone here has any experience with the Pass XP-17 settings for Hana ML?

I just switched form Pass XP-15 to 17 and its totally different animal. 

Just to compare them both with the gain set at 66db and loading 333ohm they act completely different, while 15 gets maximum bottom and fantastic detail 17 sounds great at the top and the midrange but bottom needs improvement.  Would anyone run 47K ohm? 

ssg308

Of course, try 47K; nothing is going to blow up. But it’s most likely that the difference in sonic character between 15 and 17 is due to circuit differences, not load. 

@lewm 

Yes, circuits are diametrically different that is a fact, but loading the cartridge should have same effect on cartridge performance , sound of it at least on the dynamic level should be similar to the loads on 15 at least in the characteristic of the sound. what I'm getting on same load is half of bottom end. Does it make sense to you ??

As Atmasphere is fond of reminding us, the phono load resistor is for the phono stage. Anyway, in my personal experience of playing with load resistors, the value makes very little difference. Of course, there are others who have had contrary results. So try it and let us know.