How to Open the Sonus Faber Olympica IIIs (Please Help)


Hi All !

    Please help of the Intruction how to open the Sonus Faber Olympica III . my woofers are not working, measured across the terminal is not 4 Ohms( it is open). Neither woofer or cross over went bad I think. I  need to open the speaker to get to the cross over . Greatly Appriciated 

       Dnn

128x128dnn

yes try you tube , nothing there. i do have electronic background my problem is how to get inside ( to the back of the woofer or the cross over i can manage then.)Thank you very much for all the responses , greatly appriciated.

  Peter

check if access is from the back, but my thinking is there is a trim ring around the driver mounting area that will need to come off to expose the driver mounting screws.  probably a trim ring around the outer edge of the driver. 

OP,

Unscrew the 4 screws holding the the speaker cable connecting plate and pull it out. That’s the best place to start.

All the best.

Oh, and also check the small plates between the speaker cable connector plugs and make sure they are both secure.

All the best.

Post removed