Good point, I am focusing on ‘custom’ SUT’s that are designed specifically to mate my choice of the cart’s.
Step Up Transformers….Are they Worth the Trouble?
Some of you may aware of my Garrard 301 project, it’s now very close to completion. The plinth finally shipped from Hungry after 3 months of long wait.
Given my last experience with Hana Umami Red, I would like to take things to the next level. Which brings me to mating low output cart with a SUT. Every review I’ve read so far suggests when the SUT-MC match is right, the end result is heavenly. The bass is right, the midrange is clear, and most importantly, the highs are relaxed and extended—not rolled off.
I am not saying you can’t get great sound without a SUT but it appears with a properly matched SUT, sound can be quite magical.
Thought this would be the right time to get input from experienced users here since I am still contemplating my cartridge and outboard phonostage options.
My preference would be to go with a tube phono…I kinda miss tinkering with tubes :-)
My system, Garrard 301 (fully refurbished), Reed 3P tonearm, Accuphase E-650 with built-in AD50 analog board ➡️ Tannoy Canterbury’s.
Cart and phono under consideration through my dealer,
Fuuga - Output : 0.35 mVrms | Impedance : 2.5 Ω (1kHz)
Phonostage - Tron Convergence and Konus Audio Phono Series 1000
The cart - MC combination, I am lusting after is Etsuro Urushi Bordeaux MC with their Etsuro Transformer.
https://www.etsurojapan.com/product/bordeaux
The other transformer is EMIA, cooper or silver version.
Your input is appreciated!
- ...
- 351 posts total
@lalitk has stated " Good point, I am focusing on ‘custom’ SUT’s that are designed specifically to mate my choice of the cart’s " . For this reason I have suggested the contact with Sculpture A @pindac has stated " the end result being that this Company has compelled me to place their Products experienced way up on my list of must experience a Home Trial ". |
@lalitk OK- keep in mind that if you have an SUT designed for a particular cartridge, if you change out the cartridge, you may have to change the SUT too or figure out the right loading. This will also be true to a lessor extent if you change the tonearm cable, since the capacitance of the cable is part of the loading of the transformer. Its these little details which are really the downfall of analog, not the performance or the sound! So if you get a custom transformer built, ask the manufacturer for tips for loading it for best performance. If he tells you there's no such information or you don't need it, consider looking elsewhere. |
- 351 posts total