so bass traps in corners do nothing, it seems we have been fooled. or are being fooled.

About 20 years ago I bought the Behringer measurement mic and the thing that let you compare the signal to what the mic heard.  I made 27 Risch style bass traps and had it all in the basement of my first house.  Traps definitely do make a measurable difference but you need a ton of them.  I'd say it's practically impossible to fix the bad resonances any basement will have.  You can EQ them out, which I did to +-1db.  It sounded weird, though.  I eventually gave up on heavy EQ.  The best thing for bass is to live in a house that is light construction.  Plain wood frame, drywall.  You still have resonances but a lot of the energy escapes through the walls.  Then add some traps and light EQ if you want to.  Placement is very important.  

I plan to do wall damp in my room but have been too lazy to start this project. This would seem to be a great place to start. 

@shalommorgan I have a room with very similar dimensions. What areas did you discover had the highest bass velocity or were the biggest problem areas?

For me, the corners behind my speakers were the biggest problem so I filled them both to the ceiling. 

My biggest problem area is the mid bass above 100hz has a wide dip. It's the ceiling interaction...possibly combining with the floor reflection. If I take a big trap and hoist it over my head (and speakers) during a measurement, it mostly goes away. 

One day I may do a cloud with an attached scatter plate to deal with the floor and ceiling reflection dips. 

I keep a door open behind my listening position and that does a surprisingly good job of reducing bass build up.. 

For the people out there that buy bass traps and don't find much results...I have discovered:

1. The treatments are usually in the wrong places (low velocity areas).  

2. The treatments aren't thick enough or heavy enough...foam wedges on amazon are too lightweight even if they are really thick. My panels are wood framed and are around 20 pounds each. 

3. Try air gaps...a 3 inch thick panel with a 3 inch air gap is almost as effective as a 6 inch thick panel of same construction. 

4. The GIK 244 panels with the range limiter plate (flex range tech) are the best i have found for the size. 

Several posts on other sites about Foley taking money and not delivering the product. Suits filed evidently.

I have ordered his ACDA product in the past and it got delivered just fine! In fact, GIK took longer on a couple of deliveries.